BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00276885BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX ZT-3716E memory upgrade
A 16 GB DDR4 SODIMM kit running at 3200 MHz with CL22 latency, built for the POSIFLEX ZT-3716E terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking on the POSIFLEX ZT-3716E
- DDR4 3200 CL22 modules deliver responsive data rates for point-of-sale workloads
- Low 1.2 V operation reduces power draw in always-on terminals
- 260-pin SODIMM form factor fits the ZT series slot without adapters
- Built with Samsung, Micron or Hynix ICs and stress-tested for reliability
POS terminal memory kit
This 16 GB kit contains two 8 GB DDR4 SODIMM modules rated at 3200 MHz with CL22 latency. The modules are unbuffered, non-ECC and operate at 1.2 V using a 260-pin form factor. They are built specifically for the POSIFLEX ZT-3716E Haydn ZT Series point-of-sale terminal.
Dual-channel configuration
Supplying the memory as a matched pair enables dual-channel operation on the supported platform. The 2Rx8 organisation and PC4-25600 rating are validated for the target system, so the upgrade installs without configuration changes. No heat spreaders are fitted, keeping the modules within the slim chassis clearance.
For POSIFLEX ZT-3716E owners
This kit suits technicians upgrading the named terminal to its maximum supported capacity. It is not intended for laptops, desktops or servers that require different pin counts, voltages or ECC functionality. Buyers needing higher frequencies, lower latencies or registered DIMMs should look elsewhere.
주요 특징
- 16 GB dual-channel kit boosts multitasking on the POSIFLEX ZT-3716E
- DDR4 3200 CL22 modules deliver responsive data rates for point-of-sale workloads
- Low 1.2 V operation reduces power draw in always-on terminals
- 260-pin SODIMM form factor fits the ZT series slot without adapters
- Built with Samsung, Micron or Hynix ICs and stress-tested for reliability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
이 상품에 대한 질문
Will the 2Rx8 SODIMM modules need any firmware updates or periodic re-seating after installation in the POSIFLEX ZT-3716E?
No firmware updates or scheduled re-seating are required for these 2Rx8 DDR4 SODIMMs; they are designed for stable, long-term operation once installed in the compatible POS terminal.
What thermal limit appears first when the 1.20 V DDR4 3200 kit runs continuously in the POSIFLEX ZT-3716E?
The modules operate at standard 1.20 V without heat spreaders, so the system chassis airflow becomes the limiting factor before the memory itself reaches a thermal threshold.
How much extra power draw and fan noise should I expect from the 16 GB kit running all day in the POSIFLEX ZT-3716E?
At 1.20 V the kit adds minimal power draw, and with no onboard heat spreaders it relies on existing system airflow, so fan noise typically remains unchanged during continuous operation.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
