暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 ECC SODIMM Synology RS822+ memory upgrade

SKU CH-X1GT-KF6E2

A 16GB DDR4 2666 ECC SODIMM module built for Synology RS822+ NAS upgrades

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 ECC memory protects data integrity for Synology RS822+
  • 2666 MT/s speed with CL19 latency boosts NAS responsiveness
  • 2 V low-voltage operation reduces power draw and heat
  • 2Rx8 dual-rank design maximises capacity in a single 260-pin SODIMM
  • Built with Samsung, Micron or Hynix chips and stress-tested for reliability

Synology RS822+ ECC SODIMM upgrade

This 16 GB DDR4 2666 ECC SODIMM is built for the Synology RackStation RS822+ NAS. It adds error-correcting memory to a system that relies on data integrity for file services and virtualization. The unbuffered 260-pin module installs directly into the available slot without proprietary trays. IT administrators can expand capacity in minutes using standard tools.

Replaces lower-capacity or non-ECC modules

Swapping the factory 4 GB or 8 GB stick for this 16 GB module doubles or quadruples usable memory while adding ECC protection. The jump is worth it when the NAS runs Docker containers, virtual machines or heavy multi-user file shares that exceed the original memory ceiling. Systems already at 16 GB with ECC will not benefit from this single-module upgrade.

Limited to DDR4 2666 SODIMM slot

The RS822+ accepts only DDR4 2666 unbuffered ECC SODIMMs at 1.2 V with CL19 timing. Faster DDR4 speeds downclock to 2666 MHz, and non-ECC or registered DIMMs are not supported. The single-slot design caps total memory at 16 GB, so larger deployments must use a different Synology model. No DDR5 or 288-pin DIMM will fit this platform.

特長

  • 16 GB DDR4 ECC memory protects data integrity for Synology RS822+
  • 2666 MT/s speed with CL19 latency boosts NAS responsiveness
  • 2 V low-voltage operation reduces power draw and heat
  • 2Rx8 dual-rank design maximises capacity in a single 260-pin SODIMM
  • Built with Samsung, Micron or Hynix chips and stress-tested for reliability

仕様

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR4 2666MHZ ECC Unbuffered SODIMM
Part NumberMSE21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSynology
CAS LatencyCL19
Heat SpreaderNo
Type260-PIN DDR4 ECC SODIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM

この商品に関する質問

Will the 260-pin SODIMM fit the RS822+ memory slot?

Yes, the module is a 260-pin DDR4 ECC SODIMM built for the RS822+ memory slot.

Do I need to configure anything in DSM after inserting the 16 GB stick?

No, DSM detects the 16 GB DDR4 2666 ECC module automatically on boot.

When should I replace this 1.2 V ECC SODIMM?

Replace it only if memory tests report errors or the NAS becomes unstable.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。