SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501394BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 ECC SODIMM Synology RS822+ memory upgrade
A 16GB DDR4 2666 ECC SODIMM module built for Synology RS822+ NAS upgrades
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 ECC memory protects data integrity for Synology RS822+
- 2666 MT/s speed with CL19 latency boosts NAS responsiveness
- 2 V low-voltage operation reduces power draw and heat
- 2Rx8 dual-rank design maximises capacity in a single 260-pin SODIMM
- Built with Samsung, Micron or Hynix chips and stress-tested for reliability
Synology RS822+ ECC SODIMM upgrade
This 16 GB DDR4 2666 ECC SODIMM is built for the Synology RackStation RS822+ NAS. It adds error-correcting memory to a system that relies on data integrity for file services and virtualization. The unbuffered 260-pin module installs directly into the available slot without proprietary trays. IT administrators can expand capacity in minutes using standard tools.
Replaces lower-capacity or non-ECC modules
Swapping the factory 4 GB or 8 GB stick for this 16 GB module doubles or quadruples usable memory while adding ECC protection. The jump is worth it when the NAS runs Docker containers, virtual machines or heavy multi-user file shares that exceed the original memory ceiling. Systems already at 16 GB with ECC will not benefit from this single-module upgrade.
Limited to DDR4 2666 SODIMM slot
The RS822+ accepts only DDR4 2666 unbuffered ECC SODIMMs at 1.2 V with CL19 timing. Faster DDR4 speeds downclock to 2666 MHz, and non-ECC or registered DIMMs are not supported. The single-slot design caps total memory at 16 GB, so larger deployments must use a different Synology model. No DDR5 or 288-pin DIMM will fit this platform.
주요 특징
- 16 GB DDR4 ECC memory protects data integrity for Synology RS822+
- 2666 MT/s speed with CL19 latency boosts NAS responsiveness
- 2 V low-voltage operation reduces power draw and heat
- 2Rx8 dual-rank design maximises capacity in a single 260-pin SODIMM
- Built with Samsung, Micron or Hynix chips and stress-tested for reliability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC Unbuffered SODIMM |
| Part Number | MSE21300-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 ECC SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM |
이 상품에 대한 질문
Will the 260-pin SODIMM fit the RS822+ memory slot?
Yes, the module is a 260-pin DDR4 ECC SODIMM built for the RS822+ memory slot.
Do I need to configure anything in DSM after inserting the 16 GB stick?
No, DSM detects the 16 GB DDR4 2666 ECC module automatically on boot.
When should I replace this 1.2 V ECC SODIMM?
Replace it only if memory tests report errors or the NAS becomes unstable.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
