暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V UDIMM Supermicro X13SAE memory upgrade

SKU CH-NEHC-K76HV

16 GB DDR5 5600 CL46 1Rx8 1.1 V 288-pin UDIMM matched to Supermicro X13SAE for reliable plug-in performance

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 module installs at full rated speed
  • Verified fit for Supermicro X13SAE motherboard with 288-pin UDIMM form factor
  • Built with major OEM Samsung, Micron or Hynix chips tested for stability
  • Low 1.10 V operation reduces power draw while maintaining performance
  • Lifetime replacement warranty with free US-based technical support included

Exact-match DDR5 upgrade for Supermicro X13SAE

This 16 GB DDR5-5600 UDIMM is built to the precise rank, voltage and timing the X13SAE memory controller expects. It installs as a single 288-pin unbuffered module and is recognised at full capacity and rated speed. The kit suits desktop builders and IT teams who need a verified, cost-effective memory increase for that specific platform.

Replacing slower or mismatched DDR5 modules

The jump is worth it when the board currently runs lower-speed DDR5 or when empty slots are populated with modules that do not match the 1Rx8 organisation and CL46 timing. Matched specifications eliminate the risk of down-clocking or instability that can occur with generic sticks. It is not for systems that require ECC, registered DIMMs or SODIMM form factors.

Practical limits of the DDR5-5600 UDIMM standard

The interface tops out at the 5600 MT/s data rate and 1.10 V operating voltage defined for this module class. Single-rank 1Rx8 organisation caps density per DIMM, so total system capacity depends on the motherboard slot count and population rules. Non-ECC operation means no error correction for critical workloads.

特長

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 module installs at full rated speed
  • Verified fit for Supermicro X13SAE motherboard with 288-pin UDIMM form factor
  • Built with major OEM Samsung, Micron or Hynix chips tested for stability
  • Low 1.10 V operation reduces power draw while maintaining performance
  • Lifetime replacement warranty with free US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 288-pin DDR5 UDIMM fit the Supermicro X13SAE motherboard slots?

Yes, the 288-pin DDR5 UDIMM form factor matches the Supermicro X13SAE motherboard's memory slots exactly.

What BIOS step is often missed when installing this 5600MHz CL46 module?

After seating the module, enter BIOS and confirm the memory runs at DDR5 5600 with CL46 timings at 1.10V; some boards default to slower speeds until XMP or the equivalent profile is enabled.

When should the 16GB 1Rx8 module be replaced or upgraded?

Replace only if memory errors appear during testing; otherwise, add a second identical 16GB 1Rx8 module to populate the next supported slot per the motherboard manual for increased capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。