我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V UDIMM Supermicro X13SAE memory upgrade

SKU CH-NEHC-K76HV

16 GB DDR5 5600 CL46 1Rx8 1.1 V 288-pin UDIMM matched to Supermicro X13SAE for reliable plug-in performance

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 module installs at full rated speed
  • Verified fit for Supermicro X13SAE motherboard with 288-pin UDIMM form factor
  • Built with major OEM Samsung, Micron or Hynix chips tested for stability
  • Low 1.10 V operation reduces power draw while maintaining performance
  • Lifetime replacement warranty with free US-based technical support included

Exact-match DDR5 upgrade for Supermicro X13SAE

This 16 GB DDR5-5600 UDIMM is built to the precise rank, voltage and timing the X13SAE memory controller expects. It installs as a single 288-pin unbuffered module and is recognised at full capacity and rated speed. The kit suits desktop builders and IT teams who need a verified, cost-effective memory increase for that specific platform.

Replacing slower or mismatched DDR5 modules

The jump is worth it when the board currently runs lower-speed DDR5 or when empty slots are populated with modules that do not match the 1Rx8 organisation and CL46 timing. Matched specifications eliminate the risk of down-clocking or instability that can occur with generic sticks. It is not for systems that require ECC, registered DIMMs or SODIMM form factors.

Practical limits of the DDR5-5600 UDIMM standard

The interface tops out at the 5600 MT/s data rate and 1.10 V operating voltage defined for this module class. Single-rank 1Rx8 organisation caps density per DIMM, so total system capacity depends on the motherboard slot count and population rules. Non-ECC operation means no error correction for critical workloads.

商品特色

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 module installs at full rated speed
  • Verified fit for Supermicro X13SAE motherboard with 288-pin UDIMM form factor
  • Built with major OEM Samsung, Micron or Hynix chips tested for stability
  • Low 1.10 V operation reduces power draw while maintaining performance
  • Lifetime replacement warranty with free US-based technical support included

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the 288-pin DDR5 UDIMM fit the Supermicro X13SAE motherboard slots?

Yes, the 288-pin DDR5 UDIMM form factor matches the Supermicro X13SAE motherboard's memory slots exactly.

What BIOS step is often missed when installing this 5600MHz CL46 module?

After seating the module, enter BIOS and confirm the memory runs at DDR5 5600 with CL46 timings at 1.10V; some boards default to slower speeds until XMP or the equivalent profile is enabled.

When should the 16GB 1Rx8 module be replaced or upgraded?

Replace only if memory errors appear during testing; otherwise, add a second identical 16GB 1Rx8 module to populate the next supported slot per the motherboard manual for increased capacity.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。