暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM Kit MZ33-AR1 memory upgrade

SKU CH-ZMQD-H8T8P

A 192GB DDR5 ECC registered RDIMM kit of four 48GB modules running at 5600MHz CL46 1.1V, validated for the Gigabyte MZ33-AR1 motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity with four 48 GB modules for maximum server density
  • DDR5 5600 speed rated at CL46 latency for responsive data throughput
  • Registered ECC architecture corrects single-bit errors to protect critical workloads
  • 10 V operating voltage matches the platform's memory controller specification
  • 288-pin RDIMM form factor verified for GIGABYTE MZ33-AR1 motherboard compatibility

Server memory kit for GIGABYTE MZ33-AR1

This 192GB kit contains four 48GB DDR5 RDIMM modules built for the GIGABYTE MZ33-AR1 motherboard. Registered ECC architecture lets servers run fully populated at rated speed while correcting single-bit errors on the fly. It suits administrators who need maximum supported capacity with enterprise-grade stability.

Registered DDR5 5600 CL46 at 1.1V

Each module runs at DDR5 5600 (PC5-44800) with CAS latency 46 and 1.1V, matching the exact rank, voltage and timing the board's memory controller expects. The 2Rx8 organization and registered buffer are required; UDIMM or SODIMM alternatives will not work in this platform.

Four-module installation follows manual order

The 288-pin RDIMMs install like standard DIMMs but population sequence matters on this board. Consult the motherboard manual for the approved slot order before seating all four modules; skipping that step is the most common cause of boot failure or reduced capacity.

特長

  • 192 GB total capacity with four 48 GB modules for maximum server density
  • DDR5 5600 speed rated at CL46 latency for responsive data throughput
  • Registered ECC architecture corrects single-bit errors to protect critical workloads
  • 10 V operating voltage matches the platform's memory controller specification
  • 288-pin RDIMM form factor verified for GIGABYTE MZ33-AR1 motherboard compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 5600 MHz rating mean once the modules are installed in a server?

The kit runs at DDR5-5600 (PC5-44800) with CL46 latency and 1.10 V, so the memory controller sees the rated speed and timings without manual tuning.

How does the registered ECC interface affect what the memory controller can handle?

Registered buffering offloads the controller, allowing all four slots to be fully populated at 192 GB while ECC corrects single-bit errors on the fly.

What physical slot and form factor do these 48 GB sticks need to fit the board?

Each module is a 288-pin DDR5 RDIMM; the GIGABYTE MZ33-AR1 requires this exact registered form factor, not UDIMM or SODIMM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。