暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR5 RDIMM modules in a row, 288-pin, no heat spreaders

NEMIX RAM

NEMIX RAM 1TB 8x128GB DDR5 5600 CL46 2Rx4 RDIMM ECC memory upgrade for Supermicro H14DST-F

SKU CH-JK62-FBS29

Eight 128 GB DDR5 RDIMMs deliver 1 TB of registered ECC memory at 5600 MT/s CL46 for the Supermicro H14DST-F

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1TB 8X128GB

他に 30点の構成を表示
  • 1TB DDR5-5600 kit installs at full rated speed
  • CL46 timing matches controller expectations for stable operation
  • 2Rx4 registered ECC corrects single-bit errors automatically
  • 1 V DDR5 voltage reduces power draw per module
  • 8 × 128 GB RDIMMs populate all Supermicro H14DST-F slots

Exact-fit 1 TB DDR5 kit for Supermicro H14DST-F

This NEMIX RAM kit delivers 1 TB of capacity across eight 128 GB registered ECC modules. It is built for the Supermicro H14DST-F motherboard and matches the board's required 288-pin RDIMM form factor. System integrators and server administrators can populate every slot with confidence.

2Rx4 registered ECC at DDR5-5600 CL46 1.1 V

Each module operates as a 2Rx4 registered DIMM with ECC, running at 5600 MT/s (PC5-44800) with a CAS latency of 46 at 1.1 V. The registered architecture buffers address and command signals so the memory controller remains stable when all channels are fully populated. ECC corrects single-bit errors on the fly to prevent silent data corruption.

Eight-module kit enables full-channel population

The package contains eight matched 128 GB DIMMs, allowing complete memory-channel population on the target platform. No additional cables, software licences or heat spreaders are included. Builders must still verify the motherboard manual for supported capacities and the approved DIMM installation order before fitting the modules.

特長

  • 1TB DDR5-5600 kit installs at full rated speed
  • CL46 timing matches controller expectations for stable operation
  • 2Rx4 registered ECC corrects single-bit errors automatically
  • 1 V DDR5 voltage reduces power draw per module
  • 8 × 128 GB RDIMMs populate all Supermicro H14DST-F slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 5600 MHz speed mean when all eight slots are populated?

The kit runs at DDR5 5600 (PC5 44800) with CL46 timing and 1.10 V across all eight DIMMs, so the memory controller sees the rated frequency without downclocking when fully populated.

How does the 288-pin RDIMM interface limit what the motherboard can use?

The registered 288-pin RDIMM form factor is required by the Supermicro H14DST-F; UDIMMs or SODIMMs will not fit or function in this board's DDR5 slots.

What physical clearance does each 128 GB module need inside the chassis?

Each module is a standard-height 288-pin RDIMM with no heat spreader, so it fits in any server chassis that accommodates regular DDR5 RDIMM height.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。