저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 1TB 8x128GB DDR5 5600 CL46 2Rx4 RDIMM ECC memory upgrade for Supermicro H14DST-F

SKU CH-JK62-FBS29

Eight 128 GB DDR5 RDIMMs deliver 1 TB of registered ECC memory at 5600 MT/s CL46 for the Supermicro H14DST-F

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 1TB DDR5-5600 kit installs at full rated speed
  • CL46 timing matches controller expectations for stable operation
  • 2Rx4 registered ECC corrects single-bit errors automatically
  • 1 V DDR5 voltage reduces power draw per module
  • 8 × 128 GB RDIMMs populate all Supermicro H14DST-F slots

Exact-fit 1 TB DDR5 kit for Supermicro H14DST-F

This NEMIX RAM kit delivers 1 TB of capacity across eight 128 GB registered ECC modules. It is built for the Supermicro H14DST-F motherboard and matches the board's required 288-pin RDIMM form factor. System integrators and server administrators can populate every slot with confidence.

2Rx4 registered ECC at DDR5-5600 CL46 1.1 V

Each module operates as a 2Rx4 registered DIMM with ECC, running at 5600 MT/s (PC5-44800) with a CAS latency of 46 at 1.1 V. The registered architecture buffers address and command signals so the memory controller remains stable when all channels are fully populated. ECC corrects single-bit errors on the fly to prevent silent data corruption.

Eight-module kit enables full-channel population

The package contains eight matched 128 GB DIMMs, allowing complete memory-channel population on the target platform. No additional cables, software licences or heat spreaders are included. Builders must still verify the motherboard manual for supported capacities and the approved DIMM installation order before fitting the modules.

주요 특징

  • 1TB DDR5-5600 kit installs at full rated speed
  • CL46 timing matches controller expectations for stable operation
  • 2Rx4 registered ECC corrects single-bit errors automatically
  • 1 V DDR5 voltage reduces power draw per module
  • 8 × 128 GB RDIMMs populate all Supermicro H14DST-F slots

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the 5600 MHz speed mean when all eight slots are populated?

The kit runs at DDR5 5600 (PC5 44800) with CL46 timing and 1.10 V across all eight DIMMs, so the memory controller sees the rated frequency without downclocking when fully populated.

How does the 288-pin RDIMM interface limit what the motherboard can use?

The registered 288-pin RDIMM form factor is required by the Supermicro H14DST-F; UDIMMs or SODIMMs will not fit or function in this board's DDR5 slots.

What physical clearance does each 128 GB module need inside the chassis?

Each module is a standard-height 288-pin RDIMM with no heat spreader, so it fits in any server chassis that accommodates regular DDR5 RDIMM height.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.