暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 256GB 4x64GB DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM memory upgrade for GIGABYTE MZ33-CP1

SKU CH-7FCM-5HAJ7

A 256 GB kit of four 64 GB DDR5 5600 CL46 ECC registered RDIMMs built for the GIGABYTE MZ33-CP1 server board

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

他に 24点の構成を表示
  • 256 GB total capacity lets the MZ33-CP1 run fully populated at rated speed
  • DDR5-5600 (PC5-44800) CL46 timing matches the board's memory controller expectations exactly
  • 2Rx4 registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation keeps power draw low while maintaining enterprise-grade stability
  • 288-pin RDIMM form factor fits the MZ33-CP1 slots without adapter or workaround

Exact-fit DDR5-5600 kit for GIGABYTE MZ33-CP1

This 256GB kit ships as four 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. The modules are registered ECC 2Rx4 parts built to the precise rank, voltage and timing the MZ33-CP1 memory controller expects so the system recognises the full capacity at rated speed.

Sustained-load stability from registered ECC

Registered buffering offloads the memory controller letting every slot run fully populated at full capacity while ECC catches and corrects single-bit errors on the fly. This prevents silent data corruption and unplanned reboots during continuous server workloads.

Straightforward install if population rules are

The 288-pin RDIMM form factor matches the board slots exactly with no heat spreader to clear. Builders must consult the motherboard manual for supported capacities and approved DIMM population order before installation or the kit may not initialise.

特長

  • 256 GB total capacity lets the MZ33-CP1 run fully populated at rated speed
  • DDR5-5600 (PC5-44800) CL46 timing matches the board's memory controller expectations exactly
  • 2Rx4 registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation keeps power draw low while maintaining enterprise-grade stability
  • 288-pin RDIMM form factor fits the MZ33-CP1 slots without adapter or workaround

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 1.1 V DDR5 kit run hot or noisy when fully populated all day?

The modules operate at 1.10 V with no heat spreader, so they rely on chassis airflow; registered ECC RDIMMs have no moving parts and produce no audible noise.

What motherboard slot and population rules does the GIGABYTE MZ33-CP1 need for this 256 GB kit?

The board requires 288-pin DDR5 RDIMM slots and follows its manual's approved population order for four 64 GB 2Rx4 modules at 5600 MT/s.

Can I mix these 5600 CL46 RDIMMs with slower DDR5 ECC modules already installed?

Mixing different speeds or timings forces the memory controller to run all slots at the lowest common rate, so the kit will down-clock to match the slower modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。