暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 SODIMM sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2133 CL15 260-Pin SODIMM memory upgrade

SKU CH-KBNF-5KGQ2

32 GB kit of two 16 GB DDR4 SODIMM modules running at 2133 MHz CL15 for POSIFLEX terminals

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit doubles system memory for faster POS transactions
  • DDR4 2133 CL15 timing keeps latency low in fanless terminals
  • 2 V operation reduces heat inside sealed enclosures
  • 260-pin SODIMM form factor fits the XT-6315E slot exactly
  • Major-brand Samsung, Micron or Hynix ICs deliver enterprise-grade reliability

System-Specific DDR4 SODIMM Kit

This 32 GB kit contains two 16 GB modules built for the POSIFLEX XT-6315E JIVA high-end fanless POS terminal. It uses DDR4 2133 unbuffered non-ECC silicon from major OEM suppliers to match the platform's memory controller. The 260-pin form factor fits the terminal's SODIMM slots directly. Buyers who need ECC error correction or registered modules cannot use this kit.

Low-Voltage Operation

Each module runs at 1.20 V with CL15 timing at the rated 2133 MT/s speed. The absence of a heat spreader keeps the profile thin for the fanless chassis while the low voltage limits thermal output. Power draw stays modest under typical point-of-sale workloads. Builders who require higher-frequency memory or overclocking headroom should look elsewhere.

Dual-Rank 2Rx8 Layout

The 2Rx8 organisation populates both ranks per module for maximum density in two slots. Standard gold-edge 260-pin connectors ensure reliable seating during upgrades. No extra cables, brackets or software are required for installation. Systems that only accept single-rank SODIMMs or that need a 288-pin DIMM will not accept these modules.

特長

  • 32 GB kit doubles system memory for faster POS transactions
  • DDR4 2133 CL15 timing keeps latency low in fanless terminals
  • 2 V operation reduces heat inside sealed enclosures
  • 260-pin SODIMM form factor fits the XT-6315E slot exactly
  • Major-brand Samsung, Micron or Hynix ICs deliver enterprise-grade reliability

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

この商品に関する質問

How do I install these 260-pin SODIMM modules in the POSIFLEX XT-6315E terminal and what step is often missed?

Power off the terminal, remove the memory cover, align the notch on each 260-pin module with the slot key, press firmly until both side clips click, then replace the cover before powering on.

What maintenance or replacement will this 32GB DDR4 kit need over time?

No routine maintenance is required; the modules have no heat spreader and run at 1.20V, so replacement is only needed if a module fails or capacity must increase.

What limit appears first when the POS terminal runs sustained workloads with this CL15 memory?

The DDR4 2133 speed and CL15 latency set the bandwidth ceiling, so sustained throughput is limited by the 17000 MT/s transfer rate before thermal throttling occurs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。