SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00503332BTC
在庫あり
NEMIX RAM
NEMIX RAM 32GB DDR4 3200 SODIMM POSIFLEX JK-2752 memory upgrade
32GB DDR4 3200 SODIMM for POSIFLEX JK-2752 kiosk, CL22 1.2V unbuffered non-ECC
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity lifts multitasking headroom for kiosk workloads
- DDR4 3200 speed matches POSIFLEX JK-2752 memory bus
- 20 V operation keeps power draw low in always-on terminals
- 260-pin SODIMM form factor fits the Cachet Series slot directly
- CL22 latency rated for stable operation under continuous load
Compatible upgrade for POSIFLEX JK-2752
This SODIMM module is built specifically for the POSIFLEX JK-2752 Cachet Series kiosk. It delivers a 32GB capacity upgrade using standard DDR4 technology. The single-module design fits the 260-pin slot found in the target system. It is intended for technicians maintaining or expanding memory in this specific point-of-sale hardware.
32GB single module at DDR4 3200
The kit provides 32GB in a single 1x32GB configuration operating at 3200 MT/s (PC4-25600). It uses a 2Rx8 rank organisation with CL22 latency at 1.2V. This density fills one slot completely, leaving no room for additional modules if the board has only one SODIMM socket. Systems requiring more than 32GB total capacity cannot be served by this part.
Low-voltage operation without heat spreader
The module runs at 1.20V with no heat spreader attached, relying on the kiosk chassis airflow for cooling. As an unbuffered non-ECC SODIMM, it draws minimal power during typical point-of-sale workloads. Silent operation is inherent with no moving parts. The bare PCB design keeps the profile slim for tight kiosk enclosures.
特長
- 32 GB capacity lifts multitasking headroom for kiosk workloads
- DDR4 3200 speed matches POSIFLEX JK-2752 memory bus
- 20 V operation keeps power draw low in always-on terminals
- 260-pin SODIMM form factor fits the Cachet Series slot directly
- CL22 latency rated for stable operation under continuous load
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-328K1 |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
この商品に関する質問
Will the 32GB DDR4 3200 SODIMM run at 1.2V alongside my existing lower-density DDR4 modules in the POSIFLEX JK-2752?
Yes, the module operates at 1.20V DDR4 standard voltage, so it will run at the same voltage as other DDR4 SODIMMs already installed in the JK-2752.
How can I verify the CL22 2Rx8 module is recognised at 3200 MT/s after installation?
Enter the system BIOS or use a tool such as CPU-Z; the memory tab should show 3200 MT/s, CL22 timings and 2Rx8 organisation for the new 32GB stick.
Does the MS25600-328K1 package include any mounting brackets or tools, or is it just the bare SODIMM?
The package contains only the single 32GB 260-pin DDR4 SODIMM; no brackets, screws or tools are supplied.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
