我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM module with black memory chips, 260 pins, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR4 3200 SODIMM POSIFLEX JK-2752 memory upgrade

SKU CH-4AX3-16TWV

32GB DDR4 3200 SODIMM for POSIFLEX JK-2752 kiosk, CL22 1.2V unbuffered non-ECC

  • Capacity32GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity lifts multitasking headroom for kiosk workloads
  • DDR4 3200 speed matches POSIFLEX JK-2752 memory bus
  • 20 V operation keeps power draw low in always-on terminals
  • 260-pin SODIMM form factor fits the Cachet Series slot directly
  • CL22 latency rated for stable operation under continuous load

Compatible upgrade for POSIFLEX JK-2752

This SODIMM module is built specifically for the POSIFLEX JK-2752 Cachet Series kiosk. It delivers a 32GB capacity upgrade using standard DDR4 technology. The single-module design fits the 260-pin slot found in the target system. It is intended for technicians maintaining or expanding memory in this specific point-of-sale hardware.

32GB single module at DDR4 3200

The kit provides 32GB in a single 1x32GB configuration operating at 3200 MT/s (PC4-25600). It uses a 2Rx8 rank organisation with CL22 latency at 1.2V. This density fills one slot completely, leaving no room for additional modules if the board has only one SODIMM socket. Systems requiring more than 32GB total capacity cannot be served by this part.

Low-voltage operation without heat spreader

The module runs at 1.20V with no heat spreader attached, relying on the kiosk chassis airflow for cooling. As an unbuffered non-ECC SODIMM, it draws minimal power during typical point-of-sale workloads. Silent operation is inherent with no moving parts. The bare PCB design keeps the profile slim for tight kiosk enclosures.

商品特色

  • 32 GB capacity lifts multitasking headroom for kiosk workloads
  • DDR4 3200 speed matches POSIFLEX JK-2752 memory bus
  • 20 V operation keeps power draw low in always-on terminals
  • 260-pin SODIMM form factor fits the Cachet Series slot directly
  • CL22 latency rated for stable operation under continuous load

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K1
Capacity32GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

商品問答

Will the 32GB DDR4 3200 SODIMM run at 1.2V alongside my existing lower-density DDR4 modules in the POSIFLEX JK-2752?

Yes, the module operates at 1.20V DDR4 standard voltage, so it will run at the same voltage as other DDR4 SODIMMs already installed in the JK-2752.

How can I verify the CL22 2Rx8 module is recognised at 3200 MT/s after installation?

Enter the system BIOS or use a tool such as CPU-Z; the memory tab should show 3200 MT/s, CL22 timings and 2Rx8 organisation for the new 32GB stick.

Does the MS25600-328K1 package include any mounting brackets or tools, or is it just the bare SODIMM?

The package contains only the single 32GB 260-pin DDR4 SODIMM; no brackets, screws or tools are supplied.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。