暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR4 UDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR4 2933MHz CL21 1Rx8 UDIMM memory upgrade

SKU CH-B5ZY-P4EP5

A 64 GB DDR4 kit of four 16 GB UDIMMs running at 2933 MHz CL21, verified for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 64GB 4X16GB

  • Exact 64 GB (4 × 16 GB) DDR4-2933 kit matches controller specs for full-speed recognition
  • Verified fit for Supermicro X12SCQ and X12SCZ-QF motherboards with 288-pin UDIMM form factor
  • Built with major OEM chips from Samsung, Micron, Hynix and tested at rated speed, timing and voltage
  • Low 1.2 V operation and CL21 latency reduce power draw while maintaining stable throughput
  • Lifetime replacement coverage with free US-based technical support included

Targeted Upgrade Kit

This 64GB kit contains four 16GB DDR4 UDIMM modules rated at 2933MHz with CL21 timings. It is built for owners of Supermicro X12SCQ or X12SCZ-QF motherboards who need the exact rank, voltage and timing the board expects. The non-ECC unbuffered design matches the desktop memory controller on these platforms.

Sustained Operation

Major OEM chips from Samsung, Micron or Hynix are tested at the rated 1.20V and 2933MHz speed for stability during long workloads. The 1Rx8 organisation keeps the electrical load consistent across all four slots. No heat spreader is fitted, so airflow in the chassis handles thermal management directly.

Deciding Specification

The motherboard requires 288-pin DDR4 UDIMM modules at PC4-23400 with 1Rx8 ranking and 1.2V operation. If your board calls for ECC, registered DIMMs, a different voltage or a different rank structure, this kit will not be recognised at full capacity or speed.

特長

  • Exact 64 GB (4 × 16 GB) DDR4-2933 kit matches controller specs for full-speed recognition
  • Verified fit for Supermicro X12SCQ and X12SCZ-QF motherboards with 288-pin UDIMM form factor
  • Built with major OEM chips from Samsung, Micron, Hynix and tested at rated speed, timing and voltage
  • Low 1.2 V operation and CL21 latency reduce power draw while maintaining stable throughput
  • Lifetime replacement coverage with free US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 1.2 V DDR4 kit draw when the system runs all day?

Each module operates at 1.2 V, the standard DDR4 voltage, so total power draw stays within the motherboard's normal DIMM slot budget during continuous use.

What motherboard slot and population rules must my Supermicro board already support for this 4 × 16 GB kit?

The kit needs four free 288-pin UDIMM slots and follows the X12SCQ/X12SCZ-QF population order; consult the board manual for the exact sequence before installing.

Will the CL21 2933 MHz modules run correctly alongside any existing DDR4 sticks I keep in the same board?

Mixed speeds or timings force all modules to the slowest common settings; for guaranteed rated performance use this matched 64 GB kit alone.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。