暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB 2x32GB DDR4 2933MHz CL21 2Rx8 1.2V 288-Pin UDIMM Kit Supermicro X12SAE X12SCA-F

SKU CH-FQ5T-NFQ6N

64 GB kit of two 32 GB DDR4 2933 MHz CL21 1.2 V unbuffered UDIMMs built with major OEM chips for Supermicro X12SAE and X12SCA-F boards

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 64GB 2X32GB

  • Exact-match 64 GB kit runs at rated DDR4-2933 speed
  • Verified fit for Supermicro X12SAE and X12SCA-F boards
  • Built with major OEM chips for tested stability
  • 2Rx8 Non-ECC UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

Exact-fit DDR4 kit for Supermicro boards

This 64 GB kit contains two 32 GB DDR4 2933 MT/s modules built to the PC4-23400 standard. It uses the 288-pin UDIMM form factor with a 2Rx8 rank structure and runs at 1.2 V with CL21 timing. The modules are non-ECC and unbuffered, matching the memory controller requirements of the listed Supermicro motherboards.

2Rx8 dual-rank configuration

The dual-rank 2Rx8 organisation is the single specification that determines whether the motherboard recognises the full 64 GB capacity and operates at the rated 2933 MT/s speed. Supermicro X12SAE and X12SCA-F boards expect this exact rank structure; a different rank count can cause the system to see less memory or fall back to a lower speed.

Suits owners of X12SAE

Builders upgrading those specific Supermicro platforms to the maximum supported capacity with validated timings will benefit. Buyers who need ECC error correction, registered DIMMs, SODIMM form factor, or a different DDR generation should look elsewhere because this kit provides none of those features.

特長

  • Exact-match 64 GB kit runs at rated DDR4-2933 speed
  • Verified fit for Supermicro X12SAE and X12SCA-F boards
  • Built with major OEM chips for tested stability
  • 2Rx8 Non-ECC UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the DDR4 2933 rating mean once the kit is installed in a Supermicro X12SAE or X12SCA-F system?

The modules run at 2933 MT/s with CL21 timing at 1.2 V, so the memory controller recognises the full 64 GB and operates at the rated speed without manual tuning.

How does the PC4-23400 designation relate to the motherboard's memory interface?

PC4-23400 matches the DDR4 2933 data rate supported by the X12SAE and X12SCA-F; the 288-pin UDIMM slots accept the unbuffered non-ECC DIMMs directly.

What physical space and slot layout does the 2x32 GB kit require on the target boards?

Each 32 GB stick is a standard 288-pin UDIMM with 2Rx8 organisation and no heat spreader; the kit occupies two DIMM slots per the motherboard's population rules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。