我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 64GB 2x32GB DDR4 2933MHz CL21 2Rx8 1.2V 288-Pin UDIMM Kit Supermicro X12SAE X12SCA-F

SKU CH-FQ5T-NFQ6N

64 GB kit of two 32 GB DDR4 2933 MHz CL21 1.2 V unbuffered UDIMMs built with major OEM chips for Supermicro X12SAE and X12SCA-F boards

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • Exact-match 64 GB kit runs at rated DDR4-2933 speed
  • Verified fit for Supermicro X12SAE and X12SCA-F boards
  • Built with major OEM chips for tested stability
  • 2Rx8 Non-ECC UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

Exact-fit DDR4 kit for Supermicro boards

This 64 GB kit contains two 32 GB DDR4 2933 MT/s modules built to the PC4-23400 standard. It uses the 288-pin UDIMM form factor with a 2Rx8 rank structure and runs at 1.2 V with CL21 timing. The modules are non-ECC and unbuffered, matching the memory controller requirements of the listed Supermicro motherboards.

2Rx8 dual-rank configuration

The dual-rank 2Rx8 organisation is the single specification that determines whether the motherboard recognises the full 64 GB capacity and operates at the rated 2933 MT/s speed. Supermicro X12SAE and X12SCA-F boards expect this exact rank structure; a different rank count can cause the system to see less memory or fall back to a lower speed.

Suits owners of X12SAE

Builders upgrading those specific Supermicro platforms to the maximum supported capacity with validated timings will benefit. Buyers who need ECC error correction, registered DIMMs, SODIMM form factor, or a different DDR generation should look elsewhere because this kit provides none of those features.

商品特色

  • Exact-match 64 GB kit runs at rated DDR4-2933 speed
  • Verified fit for Supermicro X12SAE and X12SCA-F boards
  • Built with major OEM chips for tested stability
  • 2Rx8 Non-ECC UDIMM matches board population rules
  • Lifetime replacement warranty with US-based technical support

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What does the DDR4 2933 rating mean once the kit is installed in a Supermicro X12SAE or X12SCA-F system?

The modules run at 2933 MT/s with CL21 timing at 1.2 V, so the memory controller recognises the full 64 GB and operates at the rated speed without manual tuning.

How does the PC4-23400 designation relate to the motherboard's memory interface?

PC4-23400 matches the DDR4 2933 data rate supported by the X12SAE and X12SCA-F; the 288-pin UDIMM slots accept the unbuffered non-ECC DIMMs directly.

What physical space and slot layout does the 2x32 GB kit require on the target boards?

Each 32 GB stick is a standard 288-pin UDIMM with 2Rx8 organisation and no heat spreader; the kit occupies two DIMM slots per the motherboard's population rules.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。