暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green circuit boards with gold edge connectors and black memory chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5-5600 ECC UDIMM CL46 1.1V 1Rx8 memory upgrade for Supermicro X13SAW-TLN4F

SKU CH-9Q3Z-215FM

A 64GB kit of four 16GB DDR5-5600 ECC UDIMM modules at CL46 and 1.1V, validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

  • ECC protection stops silent data corruption with built-in error correction
  • 64 GB kit (4 × 16 GB) gives full capacity for heavy workloads
  • DDR5-5600 (PC5-44800) speed matches board-rated performance
  • 10 V low voltage keeps power draw and heat low
  • 288-pin UDIMM form factor fits Supermicro X13SAW-TLN4F exactly

Exact-match DDR5-5600 ECC kit

This NEMIX RAM kit delivers 64GB of DDR5-5600 memory in four 16GB unbuffered ECC UDIMMs. It is built for the Supermicro X13SAW-TLN4F motherboard and matches the board's required rank, voltage and timing so the controller recognises full capacity at rated speed.

Build quality and daily fit

Modules use major OEM chips from Samsung, Micron or Hynix and run at 1.1V with CL46 latency. The 288-pin UDIMM form factor fits the board's DDR5 slots directly without heat spreaders, leaving clearance for standard CPU coolers and allowing straightforward population per the manual's slot order.

ECC reliability decides fit

On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in workloads that demand data integrity. Buyers who need registered DIMMs, SODIMMs or non-ECC memory should choose a different kit.

特長

  • ECC protection stops silent data corruption with built-in error correction
  • 64 GB kit (4 × 16 GB) gives full capacity for heavy workloads
  • DDR5-5600 (PC5-44800) speed matches board-rated performance
  • 10 V low voltage keeps power draw and heat low
  • 288-pin UDIMM form factor fits Supermicro X13SAW-TLN4F exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed and PC5 bandwidth does this 64GB kit run at?

The kit is rated at DDR5 5600 (PC5 44800), so the memory controller will operate at 5600 MT/s with a peak bandwidth of 44800 MB/s per module.

Will these 288-pin UDIMMs fit the Supermicro X13SAW-TLN4F without a heat spreader?

Yes, the 288-pin unbuffered ECC UDIMM form factor matches the board's slots exactly; the modules have no heat spreader, so they clear standard CPU coolers and chassis air ducts.

Which DIMM slots should I populate first on the X13SAW-TLN4F for this 4x16GB kit?

Consult the motherboard manual for the approved population order — typically slots A1 and B1 first, then A2 and B2 — and install all four modules in that sequence to ensure the system recognises the full 64GB at 5600 MT/s.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。