我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green circuit boards with gold edge connectors and black memory chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5-5600 ECC UDIMM CL46 1.1V 1Rx8 memory upgrade for Supermicro X13SAW-TLN4F

SKU CH-9Q3Z-215FM

A 64GB kit of four 16GB DDR5-5600 ECC UDIMM modules at CL46 and 1.1V, validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

  • ECC protection stops silent data corruption with built-in error correction
  • 64 GB kit (4 × 16 GB) gives full capacity for heavy workloads
  • DDR5-5600 (PC5-44800) speed matches board-rated performance
  • 10 V low voltage keeps power draw and heat low
  • 288-pin UDIMM form factor fits Supermicro X13SAW-TLN4F exactly

Exact-match DDR5-5600 ECC kit

This NEMIX RAM kit delivers 64GB of DDR5-5600 memory in four 16GB unbuffered ECC UDIMMs. It is built for the Supermicro X13SAW-TLN4F motherboard and matches the board's required rank, voltage and timing so the controller recognises full capacity at rated speed.

Build quality and daily fit

Modules use major OEM chips from Samsung, Micron or Hynix and run at 1.1V with CL46 latency. The 288-pin UDIMM form factor fits the board's DDR5 slots directly without heat spreaders, leaving clearance for standard CPU coolers and allowing straightforward population per the manual's slot order.

ECC reliability decides fit

On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in workloads that demand data integrity. Buyers who need registered DIMMs, SODIMMs or non-ECC memory should choose a different kit.

商品特色

  • ECC protection stops silent data corruption with built-in error correction
  • 64 GB kit (4 × 16 GB) gives full capacity for heavy workloads
  • DDR5-5600 (PC5-44800) speed matches board-rated performance
  • 10 V low voltage keeps power draw and heat low
  • 288-pin UDIMM form factor fits Supermicro X13SAW-TLN4F exactly

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What DDR5 speed and PC5 bandwidth does this 64GB kit run at?

The kit is rated at DDR5 5600 (PC5 44800), so the memory controller will operate at 5600 MT/s with a peak bandwidth of 44800 MB/s per module.

Will these 288-pin UDIMMs fit the Supermicro X13SAW-TLN4F without a heat spreader?

Yes, the 288-pin unbuffered ECC UDIMM form factor matches the board's slots exactly; the modules have no heat spreader, so they clear standard CPU coolers and chassis air ducts.

Which DIMM slots should I populate first on the X13SAW-TLN4F for this 4x16GB kit?

Consult the motherboard manual for the approved population order — typically slots A1 and B1 first, then A2 and B2 — and install all four modules in that sequence to ensure the system recognises the full 64GB at 5600 MT/s.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。