暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board DDR5 RDIMM memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM Supermicro H14SHM memory upgrade

SKU CH-EM07-SMMY5

64GB DDR5 4800 registered ECC RDIMM with CL40 timing and 1.1V operation for Supermicro H14SHM servers

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB

他に 24点の構成を表示
  • 64 GB capacity lets you run larger workloads in a single module
  • DDR5 4800 speed delivers the rated data rate your server expects
  • CL40 latency and 1.1 V voltage match the memory controller timing exactly
  • Registered ECC with 2Rx4 rank offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor fits the Supermicro H14SHM motherboard slot precisely

64GB DDR5 ECC RDIMM for Supermicro H14SHM

This 64GB DDR5 4800 registered ECC module is built for the Supermicro H14SHM motherboard. It delivers the exact rank, voltage and timing the server's memory controller expects so the full capacity is recognised at rated speed.

DDR5 RDIMM population rules and registered buffering

The H14SHM requires 288-pin registered DIMMs and follows specific population rules that vary by configuration. Registered buffering offloads the memory controller, allowing every slot to run fully populated at full capacity while ECC corrects single-bit errors on the fly. Buyers who need unbuffered UDIMMs or SODIMMs cannot use this module.

2Rx4 CL40 1.1V specification match

The 2Rx4 organisation, CL40 latency and 1.1V operating voltage must match the board's qualified-vendor list for the memory to train at DDR5 4800. If your system requires a different rank structure, timing or voltage this kit will not operate as intended.

特長

  • 64 GB capacity lets you run larger workloads in a single module
  • DDR5 4800 speed delivers the rated data rate your server expects
  • CL40 latency and 1.1 V voltage match the memory controller timing exactly
  • Registered ECC with 2Rx4 rank offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor fits the Supermicro H14SHM motherboard slot precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose a single 64GB module or a kit for my Supermicro H14SHM?

This listing is a single 64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM. Add the quantity your motherboard manual specifies per channel to reach the desired total capacity.

Will this DDR5 4800 module actually run at 4800 MT/s in my H14SHM?

Yes. The module is spec-matched to the Supermicro H14SHM memory controller, so it is recognised at full capacity and operates at its rated DDR5 4800 speed with CL40 timing.

Does the 288-pin RDIMM interface limit how many modules I can install?

The registered 288-pin RDIMM design offloads the memory controller, allowing every supported slot on the H14SHM to be fully populated at 64GB per module without signal degradation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。