暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM Supermicro H14SSL-NT memory upgrade

SKU CH-QAF0-4Y85X

64 GB DDR5 registered ECC RDIMM running at 4800 MT/s with CL40 latency and 1.1 V for the Supermicro H14SSL-NT motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64GB DDR5-4800 module adds high-density capacity to Supermicro H14SSL-NT servers
  • CL40 CAS latency and 1.1V operation deliver rated DDR5 4800 speed without manual tuning
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors on the fly
  • 2Rx4 dual-rank organisation enables full-slot population at maximum supported capacity
  • 288-pin DDR5 RDIMM form factor matches the motherboard's exact slot and population requirements

Supermicro H14SSL-NT DDR5 upgrade

This 64 GB DDR5 module is built for the Supermicro H14SSL-NT motherboard. It delivers registered ECC memory in the 288-pin RDIMM form factor that the board requires. System administrators expanding server capacity will find the exact electrical and mechanical match.

Registered 2Rx4 CL40 at 1.1 V

The module operates as a 2Rx4 registered DIMM with CL40 latency at 1.10 V. This rank, voltage and timing combination is what the memory controller expects for full-speed operation. A UDIMM or different rank configuration would not be recognised at rated speed.

64 GB per slot headroom

Each slot accepts a single 64 GB DIMM so total capacity scales with the number of populated sockets. Registered buffering lets every slot run fully populated without loading the controller. Builds needing more than the board's maximum supported slots will need a different platform.

特長

  • 64GB DDR5-4800 module adds high-density capacity to Supermicro H14SSL-NT servers
  • CL40 CAS latency and 1.1V operation deliver rated DDR5 4800 speed without manual tuning
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors on the fly
  • 2Rx4 dual-rank organisation enables full-slot population at maximum supported capacity
  • 288-pin DDR5 RDIMM form factor matches the motherboard's exact slot and population requirements

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the DDR5 4800 speed run at 4800 MT/s on my Supermicro H14SSL-NT?

The module is spec-matched to the H14SSL-NT memory controller, so it is recognised at full capacity and runs at its rated 4800 MT/s when installed in the approved slots.

What does the PC5-38400 label tell me about this RDIMM?

PC5-38400 is the DDR5 4800 JEDEC designation for this 288-pin registered ECC module, confirming the speed grade and pinout the board requires.

Does the 288-pin RDIMM fit the H14SSL-NT DIMM slots without adapters?

Yes, the 288-pin registered form factor matches the H14SSL-NT motherboard slots exactly; no UDIMM or SODIMM adapter is needed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。