暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM GIGABYTE MZ33-CP1 memory upgrade

SKU CH-ME4J-MHTAT

Sixteen-gigabyte DDR5 RDIMM modules in a 96 GB kit with ECC and registered buffering for the Gigabyte MZ33-CP1 server board

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

他に 18点の構成を表示
  • 96 GB capacity in a 6 × 16 GB kit for dense server workloads
  • DDR5 4800 speed with CL40 timing for rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full-slot operation
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard

Exact-match 96GB DDR5 kit for GIGABYTE MZ33-CP1

This 96GB kit contains six 16GB DDR5-4800 RDIMMs built to the exact rank, voltage and timing the GIGABYTE MZ33-CP1 motherboard expects. Each module is a 1Rx8 registered ECC DIMM operating at 1.1V with CL40 latency. The kit arrives new and ready to install in all six slots.

DDR5-4800 registered ECC limits

The DDR5-4800 (PC5-38400) standard sets the maximum transfer rate and the registered buffer adds one cycle of command delay, which is normal for server platforms. ECC corrects single-bit errors on the fly but cannot fix multi-bit failures. Population rules in the board manual dictate which slots must be filled first and may restrict maximum capacity per channel.

288-pin RDIMM build and daily handling

Modules use a bare 288-pin PCB without a heat spreader, relying on chassis airflow for cooling. The registered design keeps electrical loading low when all six slots are populated, helping the memory controller maintain stability. Handle the DIMMs by the edges, align the key notch with the slot, and press firmly until the ejectors click to seat them correctly.

特長

  • 96 GB capacity in a 6 × 16 GB kit for dense server workloads
  • DDR5 4800 speed with CL40 timing for rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full-slot operation
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 96GB kit or a smaller capacity for my GIGABYTE MZ33-CP1?

The 96GB kit provides six 16GB modules that fully populate the board's DDR5 slots, delivering the maximum supported capacity at the rated 4800 speed with 1Rx8 registered ECC.

What does the DDR5 4800 rating mean once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with CL40 timings at 1.10V, and the registered design keeps every slot stable at full population.

How does the 288-pin RDIMM interface limit what I can install?

The 288-pin registered form factor is required by the MZ33-CP1; UDIMM or SODIMM modules will not fit or function in this platform.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。