Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM GIGABYTE MZ33-CP1 memory upgrade

SKU CH-ME4J-MHTAT

Sixteen-gigabyte DDR5 RDIMM modules in a 96 GB kit with ECC and registered buffering for the Gigabyte MZ33-CP1 server board

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Pokaż jeszcze 18 konfiguracji
  • 96 GB capacity in a 6 × 16 GB kit for dense server workloads
  • DDR5 4800 speed with CL40 timing for rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full-slot operation
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard

Exact-match 96GB DDR5 kit for GIGABYTE MZ33-CP1

This 96GB kit contains six 16GB DDR5-4800 RDIMMs built to the exact rank, voltage and timing the GIGABYTE MZ33-CP1 motherboard expects. Each module is a 1Rx8 registered ECC DIMM operating at 1.1V with CL40 latency. The kit arrives new and ready to install in all six slots.

DDR5-4800 registered ECC limits

The DDR5-4800 (PC5-38400) standard sets the maximum transfer rate and the registered buffer adds one cycle of command delay, which is normal for server platforms. ECC corrects single-bit errors on the fly but cannot fix multi-bit failures. Population rules in the board manual dictate which slots must be filled first and may restrict maximum capacity per channel.

288-pin RDIMM build and daily handling

Modules use a bare 288-pin PCB without a heat spreader, relying on chassis airflow for cooling. The registered design keeps electrical loading low when all six slots are populated, helping the memory controller maintain stability. Handle the DIMMs by the edges, align the key notch with the slot, and press firmly until the ejectors click to seat them correctly.

Najważniejsze cechy

  • 96 GB capacity in a 6 × 16 GB kit for dense server workloads
  • DDR5 4800 speed with CL40 timing for rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full-slot operation
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Should I choose the 96GB kit or a smaller capacity for my GIGABYTE MZ33-CP1?

The 96GB kit provides six 16GB modules that fully populate the board's DDR5 slots, delivering the maximum supported capacity at the rated 4800 speed with 1Rx8 registered ECC.

What does the DDR5 4800 rating mean once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with CL40 timings at 1.10V, and the registered design keeps every slot stable at full population.

How does the 288-pin RDIMM interface limit what I can install?

The 288-pin registered form factor is required by the MZ33-CP1; UDIMM or SODIMM modules will not fit or function in this platform.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.