NEMIX RAM DDR5 4800 ECC Registered RDIMM 96GB (6x16GB) CL40 1.1V 288-pin memory upgrade for GIGABYTE MZ73-LM2
- 96GB (6 x 16GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
Sixteen-gigabyte DDR5 RDIMM modules in a 96 GB kit with ECC and registered buffering for the Gigabyte MZ33-CP1 server board
Size 96GB 6X16GB
This 96GB kit contains six 16GB DDR5-4800 RDIMMs built to the exact rank, voltage and timing the GIGABYTE MZ33-CP1 motherboard expects. Each module is a 1Rx8 registered ECC DIMM operating at 1.1V with CL40 latency. The kit arrives new and ready to install in all six slots.
The DDR5-4800 (PC5-38400) standard sets the maximum transfer rate and the registered buffer adds one cycle of command delay, which is normal for server platforms. ECC corrects single-bit errors on the fly but cannot fix multi-bit failures. Population rules in the board manual dictate which slots must be filled first and may restrict maximum capacity per channel.
Modules use a bare 288-pin PCB without a heat spreader, relying on chassis airflow for cooling. The registered design keeps electrical loading low when all six slots are populated, helping the memory controller maintain stability. Handle the DIMMs by the edges, align the key notch with the slot, and press firmly until the ejectors click to seat them correctly.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | GIGABYTE |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The 96GB kit provides six 16GB modules that fully populate the board's DDR5 slots, delivering the maximum supported capacity at the rated 4800 speed with 1Rx8 registered ECC.
The memory controller will run the kit at 4800 MT/s with CL40 timings at 1.10V, and the registered design keeps every slot stable at full population.
The 288-pin registered form factor is required by the MZ33-CP1; UDIMM or SODIMM modules will not fit or function in this platform.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?