暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 ECC UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM DDR4 2666 16GB (2x8GB) ECC Unbuffered UDIMM CL19 1.2V for ASUS WS C246M PRO/SE

SKU CH-X5SZ-WWA27

A 16 GB DDR4 ECC unbuffered UDIMM kit running at 2666 MHz with CL19 latency, verified for ASUS WS C246M PRO and PRO/SE workstation motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Size 16GB 2X8GB

  • ECC protection stops silent data corruption and crashes
  • Exact DDR4-2666 CL19 1.2V spec matches board requirements
  • 16 GB dual-channel kit uses 1Rx8 unbuffered UDIMMs
  • 288-pin form factor fits ASUS WS C246M PRO/SE slots
  • Major-brand Samsung Micron Hynix chips ensure consistent quality

Exact-match DDR4 ECC kit for ASUS workstations

This 16 GB kit delivers two 8 GB DDR4 2666 UDIMMs with ECC, 1.2 V operation and CL19 timing. The modules are validated for the ASUS WS C246M PRO and WS C246M PRO/SE motherboards so the memory controller recognises the full capacity at rated speed without manual adjustment.

Suited for ECC workloads.

Builders who need error-correcting memory for data-integrity tasks such as scientific computing, rendering or server workloads will benefit from the on-the-fly correction. Systems that require registered DIMMs, SODIMMs or non-ECC unbuffered modules cannot use this kit.

Fits 288-pin UDIMM slots on the C246 platform

The 288-pin unbuffered ECC form factor matches the board's DIMM sockets and population rules, leaving no need for adapters or BIOS workarounds. Installing the pair frees remaining slots for future capacity expansion while keeping the memory subsystem within the board's validated configuration.

特長

  • ECC protection stops silent data corruption and crashes
  • Exact DDR4-2666 CL19 1.2V spec matches board requirements
  • 16 GB dual-channel kit uses 1Rx8 unbuffered UDIMMs
  • 288-pin form factor fits ASUS WS C246M PRO/SE slots
  • Major-brand Samsung Micron Hynix chips ensure consistent quality

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME21300-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASUS
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 2666MHz PC4-21300 1Rx8 1.2V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard must I already have for this 288-pin DDR4 2666 kit to work?

The kit is validated for the ASUS WS C246M PRO and WS C246M PRO/SE workstation motherboards that accept 288-pin unbuffered ECC UDIMMs.

Will this 1Rx8 CL19 kit run alongside any existing DDR4 2666 ECC UDIMMs I keep in the same board?

Yes, if the installed modules are also DDR4 2666 unbuffered ECC UDIMMs at 1.2 V, the memory controller will operate all DIMMs at the common 2666 MT/s speed and CL19 timing.

How can I confirm the 16 GB kit is recognised at full speed after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 2666 MHz, the capacity shows 16 GB, and ECC status is reported as enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。