NEMIX RAM DDR5 4800 16GB 2x8GB CL40 1.1V SODIMM memory upgrade for Supermicro X13SRN-E
- 16GB (2 x 8GB)
- 262-Pin DDR5 SODIMM
NEMIX RAM
32 GB dual-channel DDR4-3200 SODIMM kit with CL22 timing and 1.2 V operation, validated for Supermicro X12STN motherboards
Size 32GB 2X16GB
This 32GB kit contains two 16GB DDR4-3200 modules built to the exact rank, voltage and timing the Supermicro X12STN memory controller expects. Each stick is a 260-pin unbuffered SODIMM rated at CL22 and 1.2V, using major OEM chips from Samsung, Micron or Hynix. The kit targets administrators and technicians who need a verified, drop-in capacity increase for this specific platform.
Operating at the standard 1.2V DDR4 voltage, the modules draw minimal power and produce negligible heat during typical workloads. No heat spreader is fitted, so the bare DRAM packages rely on normal chassis airflow, which is sufficient for everyday server or workstation duties. Silent operation is assured because the memory has no moving parts and adds no audible noise to the system.
The CL22 timing and 1Rx8 organisation remain stable at the rated 3200 MT/s during extended compute tasks such as virtualisation, compilation or database work. Major-brand DRAM and factory validation at speed, voltage and latency reduce the risk of errors when the memory subsystem runs continuously at full throughput. The kit delivers consistent bandwidth for long-running workloads without throttling or instability.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS25600-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 260-Pin DDR4 SODIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 260-PIN Non-ECC SODIMM KIT |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Power off the system, open the chassis, align each 260-pin SODIMM with the slot key, insert at an angle, then press down firmly until both side clips click — the step most people miss is verifying both clips are fully latched.
No scheduled maintenance is required; the modules have no heat spreader or moving parts, so replacement is only needed if a module fails or you later upgrade capacity beyond 32GB.
The CAS latency of 22 cycles at 3200MHz sets the timing ceiling; under continuous heavy workloads the memory controller will hit this latency boundary before voltage or thermal limits become a factor.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?