NEMIX RAM DDR5 4800 16GB 2x8GB CL40 1.1V SODIMM memory upgrade for Supermicro X13SRN-E
- 16GB (2 x 8GB)
- 262-Pin DDR5 SODIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
32 GB dual-channel DDR4-3200 SODIMM kit with CL22 timing and 1.2 V operation, validated for Supermicro X12STN motherboards
Size 32GB 2X16GB
This 32GB kit contains two 16GB DDR4-3200 modules built to the exact rank, voltage and timing the Supermicro X12STN memory controller expects. Each stick is a 260-pin unbuffered SODIMM rated at CL22 and 1.2V, using major OEM chips from Samsung, Micron or Hynix. The kit targets administrators and technicians who need a verified, drop-in capacity increase for this specific platform.
Operating at the standard 1.2V DDR4 voltage, the modules draw minimal power and produce negligible heat during typical workloads. No heat spreader is fitted, so the bare DRAM packages rely on normal chassis airflow, which is sufficient for everyday server or workstation duties. Silent operation is assured because the memory has no moving parts and adds no audible noise to the system.
The CL22 timing and 1Rx8 organisation remain stable at the rated 3200 MT/s during extended compute tasks such as virtualisation, compilation or database work. Major-brand DRAM and factory validation at speed, voltage and latency reduce the risk of errors when the memory subsystem runs continuously at full throughput. The kit delivers consistent bandwidth for long-running workloads without throttling or instability.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS25600-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 260-Pin DDR4 SODIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 260-PIN Non-ECC SODIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Power off the system, open the chassis, align each 260-pin SODIMM with the slot key, insert at an angle, then press down firmly until both side clips click — the step most people miss is verifying both clips are fully latched.
No scheduled maintenance is required; the modules have no heat spreader or moving parts, so replacement is only needed if a module fails or you later upgrade capacity beyond 32GB.
The CAS latency of 22 cycles at 3200MHz sets the timing ceiling; under continuous heavy workloads the memory controller will hit this latency boundary before voltage or thermal limits become a factor.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?