SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501144BTC
在庫あり
NEMIX RAM
NEMIX RAM DDR5 1.5TB 12x128GB 5600MHz CL46 ECC RDIMM memory upgrade
1.5 TB server kit with twelve 128 GB DDR5 registered ECC modules at 5600 MHz CL46 for Supermicro H13SSF
- Capacity1.5TB (12 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- Massive 1.5 TB capacity from twelve 128 GB modules
- DDR5 5600 speed keeps data flowing at rated bandwidth
- ECC and registered design correct errors and stabilise full population
- 1 V operation reduces power draw per module
- Verified fit for Supermicro H13SSF motherboard
Exact-match DDR5 kit for Supermicro H13SSF
This 1.5TB kit delivers 12 modules of 128GB DDR5 5600 CL46 ECC RDIMM memory. It is built for administrators who need maximum registered capacity on the Supermicro H13SSF motherboard. The 2Rx4 organisation and 1.1V operation match the board's memory controller requirements exactly.
Sustained enterprise stability under full population
Registered buffering offloads the memory controller so all 12 slots run at the rated 5600MHz without downclocking. ECC corrects single-bit errors on the fly, preventing silent data corruption during continuous workloads. The major OEM Samsung, Micron or Hynix chips maintain specified timings at 1.1V across extended duty cycles.
Straightforward 288-pin RDIMM installation
Modules install in the standard 288-pin DDR5 RDIMM slots following the motherboard manual's population order. No heat spreaders are present, so clearance is not a concern. The critical step is verifying the exact DIMM sequence in the Supermicro H13SSF documentation before seating all 12 modules.
特長
- Massive 1.5 TB capacity from twelve 128 GB modules
- DDR5 5600 speed keeps data flowing at rated bandwidth
- ECC and registered design correct errors and stabilise full population
- 1 V operation reduces power draw per module
- Verified fit for Supermicro H13SSF motherboard
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
この商品に関する質問
How much power and heat will the 1.1V DDR5 5600 RDIMMs generate when all twelve slots run 24/7?
Each module operates at 1.10 volts and DDR5 5600 speed. Registered buffering reduces electrical load on the memory controller, helping keep power draw and heat predictable across the full 1.5TB kit during continuous operation.
What must my motherboard provide for this 12 x 128GB kit to be recognised at full capacity?
The board needs twelve 288-pin DDR5 RDIMM slots, support for 2Rx4 registered ECC modules, and a memory controller validated for 1.5TB total capacity at DDR5 5600 (PC5-44800) with CL46 timing.
Can I mix these CL46 5600MHz RDIMMs with any older DDR5 modules I already have installed?
All twelve slots should use identical 2Rx4 registered ECC DDR5 5600 CL46 1.10V modules. Mixing different ranks, speeds, latencies or voltages will prevent the system from running at the rated 5600MHz.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
