暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 384GB 8x48GB CL46 ECC RDIMM MZ33-CP1 memory upgrade

SKU CH-1ZX0-ESN0K

Eight 48 GB DDR5-5600 Registered ECC RDIMMs at CL46 and 1.1 V, validated for the GIGABYTE MZ33-CP1 motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 8X48GB

他に 24点の構成を表示
  • 384 GB total capacity from eight 48 GB modules for maximum server density
  • DDR5-5600 speed rated at PC5-44800 for high-throughput workloads
  • CL46 latency at 1.10 V for efficient registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor validated for the Gigabyte MZ33-CP1 motherboard

384 GB DDR5-5600 ECC RDIMM kit

This NEMIX RAM kit delivers 384 GB of DDR5 server memory across eight 48 GB Registered DIMMs. Each module runs at 5600 MT/s with CL46 latency at 1.1 V. The 2Rx8 organisation and on-die ECC provide the data-integrity features required by the GIGABYTE MZ33-CP1 motherboard.

Suited for administrators populating every slot

Builders who need unbuffered UDIMMs or non-ECC memory should look elsewhere, as this kit uses Registered architecture and ECC that those platforms cannot accept. Systems limited to lower maximum capacities or different pin layouts also cannot use these modules.

Sustained load stability from registered buffering

The registered design reduces electrical load on the memory controller, allowing all eight slots to operate at the rated 5600 MT/s continuously. ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs without thermal throttling or speed reduction.

特長

  • 384 GB total capacity from eight 48 GB modules for maximum server density
  • DDR5-5600 speed rated at PC5-44800 for high-throughput workloads
  • CL46 latency at 1.10 V for efficient registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor validated for the Gigabyte MZ33-CP1 motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

My GIGABYTE MZ33-CP1 motherboard currently has empty DDR5 RDIMM slots — what do I need to confirm before adding this 384GB kit?

Verify the motherboard manual for supported memory population rules, maximum capacity per slot, and the required DIMM installation order for eight 48GB modules running at DDR5 5600.

Will this registered ECC DDR5 kit operate correctly if I populate all eight slots on the MZ33-CP1?

Yes, the 2Rx8 registered design offloads the memory controller so every slot can run fully populated at the rated 5600 MT/s with CL46 timing and 1.1V.

After installation, how can I confirm the kit is running at its specified 5600 MT/s with CL46 latency?

Enter the BIOS or use a hardware-monitoring utility to check that the memory frequency reports 5600 MT/s (PC5-44800) and the CAS latency shows CL46 at 1.1V.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。