暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Twelve bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 1.1TB (12x96GB) CL46 2Rx4 1.1V 288-Pin Kit for GIGABYTE MA34-CP0 memory upgrade

SKU CH-TXYZ-MK7KP

1.1TB DDR5 5600 ECC registered RDIMM kit with twelve 96GB modules at CL46 for GIGABYTE MA34-CP0 servers

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

他に 24点の構成を表示
  • 1 TB total capacity with twelve 96 GB modules for maximum server density
  • DDR5 5600 speed rated at PC5 44800 for high throughput workloads
  • Registered ECC architecture offloads the memory controller and corrects single bit errors
  • CL46 latency at 1.1 V optimised for stability in fully populated configurations
  • Verified compatibility with the GIGABYTE MA34 CP0 motherboard 288 pin RDIMM slots

Kit DDR5-5600 ECC RDIMM 1.1TB

This NEMIX RAM kit provides 1.1TB of DDR5-5600 registered ECC memory across twelve 96GB modules. It is built for the GIGABYTE MA34-CP0 motherboard where full-capacity registered DIMMs are required. The CL46 latency and 1.1V operation match the board's native memory controller specification.

Suits MA34-CP0 servers needing maximum registered

This kit suits administrators populating every slot on a GIGABYTE MA34-CP0 with registered ECC modules. It does not suit builds that require unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or speeds other than DDR5-5600.

Deciding spec: twelve 96GB 2Rx4 registered ECC

The single specification that decides fitment is the twelve-module 2Rx4 registered ECC configuration at DDR5-5600. The memory controller must accept this exact rank structure, voltage, and form factor to recognise the full 1.1TB at rated speed.

特長

  • 1 TB total capacity with twelve 96 GB modules for maximum server density
  • DDR5 5600 speed rated at PC5 44800 for high throughput workloads
  • Registered ECC architecture offloads the memory controller and corrects single bit errors
  • CL46 latency at 1.1 V optimised for stability in fully populated configurations
  • Verified compatibility with the GIGABYTE MA34 CP0 motherboard 288 pin RDIMM slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Do I need a GIGABYTE MA34-CP0 motherboard with 12 DDR5 RDIMM slots to use this 1.1TB kit?

Yes, the kit is built for the GIGABYTE MA34-CP0 and requires 12 available 288-pin DDR5 RDIMM slots running at 1.10V to install all 96GB modules.

Can I mix these 2Rx4 DDR5 5600 CL46 modules with other DDR5 ECC RDIMMs already installed in the board?

Mixing ranks, speeds or latencies is not recommended; the board expects identical 2Rx4 PC5-44800 CL46 modules in every populated slot for stable operation.

How can I verify the kit runs at 5600 MT/s with CL46 after installation?

Enter the BIOS or use a tool like CPU-Z to confirm each module reports DDR5-5600, PC5-44800, CL46, 1.10V and 2Rx4 organisation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。