暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 384GB 12x32GB Supermicro H14DST-FL memory upgrade

SKU CH-AATM-H25KN

384 GB DDR5-5600 ECC Registered RDIMM kit with twelve 32 GB modules at CL46, 1.1 V, 2Rx8, 288-pin, validated for Supermicro H14DST-FL

  • Capacity384GB (12 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity across 12 matched 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated server performance
  • Registered ECC design corrects single-bit errors and buffers the memory controller
  • 1 V operation at 2Rx8 rank matches Supermicro H14DST-FL requirements
  • 288-pin RDIMM form factor ensures exact physical and electrical fit

384GB DDR5 RDIMM kit for Supermicro H14DST-FL

This kit supplies 384GB across twelve 32GB DDR5 5600 RDIMM modules built to the Supermicro H14DST-FL motherboard's exact requirements. Registered ECC architecture and 2Rx8 organization match the board's memory controller expectations for full-capacity recognition. System integrators and IT teams upgrading compatible Supermicro platforms receive a validated, single-part-number solution.

Sustained-load behaviour with registered ECC

Registered buffering reduces electrical load on the memory controller so all twelve slots remain stable at the rated 5600 MT/s speed under continuous throughput. ECC corrects single-bit errors on the fly preventing silent data corruption during long compute runs. CL46 latency and 1.1V operation maintain efficiency without throttling when the system runs fully populated for extended periods.

Installation notes and common pitfalls

Modules are 288-pin RDIMMs without heat spreaders so they seat directly into the board's DDR5 DIMM slots following the manual's population sequence. The kit will not fit UDIMM or SODIMM sockets and cannot be mixed with unregistered or non-ECC memory. Verify the motherboard's approved DIMM order and maximum supported capacity per slot before installation to avoid a no-post condition.

特長

  • 384 GB total capacity across 12 matched 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated server performance
  • Registered ECC design corrects single-bit errors and buffers the memory controller
  • 1 V operation at 2Rx8 rank matches Supermicro H14DST-FL requirements
  • 288-pin RDIMM form factor ensures exact physical and electrical fit

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K12
Capacity384GB (12 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 12X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 1.1 V DDR5 5600 kit add noticeable heat when all twelve slots are populated on the H14DST-FL?

At 1.1 V the modules run at the standard DDR5 5600 voltage, so thermal load matches the board's rated design for full 12-slot population.

What must the server already have to accept this 12 x 32 GB registered ECC kit?

A Supermicro H14DST-FL motherboard with twelve free 288-pin RDIMM slots and a BIOS that supports 384 GB of DDR5 5600 registered ECC memory.

Can the CL46 2Rx8 RDIMMs share channels with older DDR5 modules already in the system?

Mixing ranks, latencies or voltages is not recommended; the board's memory controller expects identical 2Rx8 CL46 1.1 V modules in every populated slot for stable operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。