暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two bare green DDR5 UDIMM sticks, no heat spreaders, 288-pin gold contacts visible

NEMIX RAM

NEMIX RAM MD44800-328K2 64GB (2×32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM Supermicro X13SAW-F

SKU CH-TC18-A2D2J

A 64GB dual-channel DDR5 kit (2×32GB) running at 5600MHz CL46 1.1V, validated for the Supermicro X13SAW-F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 2X32GB

  • 64 GB capacity from two 32 GB modules for high-density desktop workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth at 1.1 V
  • 2Rx8 dual-rank organisation matches the memory controller expectations of the Supermicro X13SAW-F
  • 288-pin UDIMM form factor fits the board's unbuffered non-ECC slots exactly
  • Built with Samsung, Micron or Hynix OEM chips and tested for stability at rated specifications

Exact-match kit for Supermicro X13SAW-F

This 64 GB kit contains two 32 GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. The modules are built with major OEM DRAM chips and use the 288-pin unbuffered non-ECC form factor the motherboard requires. No heat spreaders are included.

Verified fitment removes guesswork

The kit is tested for stability at the rated speed, timing and voltage, so the memory controller recognises the full capacity immediately. Rank configuration (2Rx8) matches the board's population rules, avoiding the partial-recognition issues that mismatched modules can cause.

Suits builders upgrading a Supermicro X13SAW-F

Buyers needing ECC error correction, registered DIMMs, SODIMM form factor or speeds beyond DDR5-5600 should look elsewhere. The kit also does not address systems limited to lower total capacities or different pin counts.

特長

  • 64 GB capacity from two 32 GB modules for high-density desktop workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth at 1.1 V
  • 2Rx8 dual-rank organisation matches the memory controller expectations of the Supermicro X13SAW-F
  • 288-pin UDIMM form factor fits the board's unbuffered non-ECC slots exactly
  • Built with Samsung, Micron or Hynix OEM chips and tested for stability at rated specifications

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the DDR5 5600 modules need a heat spreader added later?

The kit ships without a heat spreader; DDR5 5600 at 1.1 V runs within JEDEC thermal limits, so no aftermarket cooling is required for normal desktop workloads.

What limit appears first when the 64 GB kit runs at 5600 MT/s all day?

The memory controller on the Supermicro X13SAW-F caps the DDR5 5600 UDIMM slots at the rated 5600 MT/s, so sustained throughput tops out at the module's 44800 MB/s spec.

How much power and heat does the 2×32 GB kit produce at 1.1 V under continuous load?

Each 32 GB DDR5 UDIMM draws roughly 4–5 W at 1.1 V, so the pair adds about 8–10 W of heat — well within standard desktop airflow.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。