暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green circuit boards with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM ME25600-818K2 16GB 2x8GB DDR4 3200 ECC UDIMM for Supermicro X12STE-F X12STD-F memory upgrade

SKU CH-FG7H-D6ZEP

16 GB DDR4 3200 ECC UDIMM kit in two 8 GB modules at 1.2 V CL22 for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 16GB 2X8GB

  • Exact-fit 16 GB kit runs at rated DDR4-3200 on Supermicro X12STE-F / X12STD-F
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • 1Rx8 unbuffered 1.20 V CL22 modules match the board's memory-controller specs
  • 288-pin UDIMM form factor installs directly in the required DIMM slots
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR4 ECC kit

This 16 GB kit contains two 8 GB DDR4 3200 ECC UDIMMs built to the Supermicro X12STE-F and X12STD-F memory specifications. The modules run at 1.2 V with CL22 timing and a 1Rx8 layout so the board recognises the full capacity at rated speed.

Capacity and headroom

Sixteen gigabytes handles everyday server workloads, virtualisation hosts and database buffers without paging. Heavy multi-tenant virtualisation or large in-memory analytics will exhaust the two slots and require a platform with more DIMM sockets.

DDR4 UDIMM interface limits

The 288-pin unbuffered ECC interface tops out at the DDR4 3200 transfer rate this kit delivers. Bandwidth and latency are fixed by the memory controller, so workloads needing higher throughput must move to a newer platform rather than faster modules.

特長

  • Exact-fit 16 GB kit runs at rated DDR4-3200 on Supermicro X12STE-F / X12STD-F
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • 1Rx8 unbuffered 1.20 V CL22 modules match the board's memory-controller specs
  • 288-pin UDIMM form factor installs directly in the required DIMM slots
  • Lifetime replacement warranty with US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this DDR4 3200 ECC UDIMM kit work in the remaining slots of my Supermicro X12STE-F alongside existing DDR4 ECC UDIMM modules?

This kit is verified for the Supermicro X12STE-F and X12STD-F motherboards as a 288-pin DDR4 3200 ECC Unbuffered UDIMM; mixing with other DDR4 ECC UDIMMs is possible if the board's memory-population rules are followed, but the system will run all modules at the lowest common speed and timing.

How can I confirm the kit is running at DDR4 3200 with ECC active after installation?

Enter the BIOS or use a tool such as dmidecode on Linux to verify the reported speed shows 3200 MT/s, the voltage reads 1.20V, and the ECC status is enabled for each 8 GB DIMM.

What exactly ships in the box and is anything else required to install it?

The box contains the 16 GB kit (2 x 8 GB DDR4 3200 ECC UDIMM modules); no heat spreaders, cables, or additional parts are included, and no separate purchase is needed for standard installation into compatible 288-pin slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。