我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green circuit boards with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM ME25600-818K2 16GB 2x8GB DDR4 3200 ECC UDIMM for Supermicro X12STE-F X12STD-F memory upgrade

SKU CH-FG7H-D6ZEP

16 GB DDR4 3200 ECC UDIMM kit in two 8 GB modules at 1.2 V CL22 for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 16GB 2X8GB

  • Exact-fit 16 GB kit runs at rated DDR4-3200 on Supermicro X12STE-F / X12STD-F
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • 1Rx8 unbuffered 1.20 V CL22 modules match the board's memory-controller specs
  • 288-pin UDIMM form factor installs directly in the required DIMM slots
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR4 ECC kit

This 16 GB kit contains two 8 GB DDR4 3200 ECC UDIMMs built to the Supermicro X12STE-F and X12STD-F memory specifications. The modules run at 1.2 V with CL22 timing and a 1Rx8 layout so the board recognises the full capacity at rated speed.

Capacity and headroom

Sixteen gigabytes handles everyday server workloads, virtualisation hosts and database buffers without paging. Heavy multi-tenant virtualisation or large in-memory analytics will exhaust the two slots and require a platform with more DIMM sockets.

DDR4 UDIMM interface limits

The 288-pin unbuffered ECC interface tops out at the DDR4 3200 transfer rate this kit delivers. Bandwidth and latency are fixed by the memory controller, so workloads needing higher throughput must move to a newer platform rather than faster modules.

商品特色

  • Exact-fit 16 GB kit runs at rated DDR4-3200 on Supermicro X12STE-F / X12STD-F
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • 1Rx8 unbuffered 1.20 V CL22 modules match the board's memory-controller specs
  • 288-pin UDIMM form factor installs directly in the required DIMM slots
  • Lifetime replacement warranty with US-based technical support included

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will this DDR4 3200 ECC UDIMM kit work in the remaining slots of my Supermicro X12STE-F alongside existing DDR4 ECC UDIMM modules?

This kit is verified for the Supermicro X12STE-F and X12STD-F motherboards as a 288-pin DDR4 3200 ECC Unbuffered UDIMM; mixing with other DDR4 ECC UDIMMs is possible if the board's memory-population rules are followed, but the system will run all modules at the lowest common speed and timing.

How can I confirm the kit is running at DDR4 3200 with ECC active after installation?

Enter the BIOS or use a tool such as dmidecode on Linux to verify the reported speed shows 3200 MT/s, the voltage reads 1.20V, and the ECC status is enabled for each 8 GB DIMM.

What exactly ships in the box and is anything else required to install it?

The box contains the 16 GB kit (2 x 8 GB DDR4 3200 ECC UDIMM modules); no heat spreaders, cables, or additional parts are included, and no separate purchase is needed for standard installation into compatible 288-pin slots.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。