暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM MR44800-724K12 1.5TB 12x128GB DDR5 5600 ECC RDIMM memory upgrade

SKU CH-M206-JD9EV

1.5 TB DDR5 server memory kit with twelve 128 GB registered ECC modules at 5600 MHz CL46 1.1 V for the GIGABYTE MZ33-CP1 motherboard

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

他に 24点の構成を表示
  • 5 TB total capacity from twelve 128 GB modules enables maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for compute-intensive workloads
  • Registered ECC architecture corrects single-bit errors and supports full-slot population stability
  • 10 V operation reduces power draw across all twelve DIMMs
  • Verified fitment for GIGABYTE MZ33-CP1 motherboard ensures correct 288-pin RDIMM recognition

Exact-match upgrade

This NEMIX RAM kit delivers 1.5TB across twelve 128GB DDR5 5600 RDIMMs. Registered ECC architecture and CL46 timing at 1.1V match the GIGABYTE MZ33-CP1 memory controller exactly. Every module is recognised at full capacity and rated speed without manual tuning.

Replaces mixed-capacity kits

The 2Rx4 registered design allows all twelve slots to run fully populated at 5600 MT/s. Upgrading from smaller or mixed-rank configurations removes the population limits that force lower speeds or reduced capacity. The jump is worth it when the workload needs the full 1.5TB address space at native DDR5 5600 bandwidth.

Sustained-load behaviour

Registered buffering offloads the memory controller so signal integrity holds across all channels during continuous operation. ECC corrects single-bit errors on the fly, preventing silent data corruption that would otherwise trigger unplanned reboots under heavy, prolonged throughput.

特長

  • 5 TB total capacity from twelve 128 GB modules enables maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for compute-intensive workloads
  • Registered ECC architecture corrects single-bit errors and supports full-slot population stability
  • 10 V operation reduces power draw across all twelve DIMMs
  • Verified fitment for GIGABYTE MZ33-CP1 motherboard ensures correct 288-pin RDIMM recognition

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 12 288-pin DDR5 RDIMM modules fit the GIGABYTE MZ33-CP1 motherboard DIMM slots?

Yes, the kit contains 12 registered 288-pin DDR5 RDIMMs built to the 2Rx4 layout the MZ33-CP1 memory controller expects, so every slot accepts a module at full 1.5 TB capacity.

What is the correct installation sequence for the 12 DDR5 5600 RDIMMs on the GIGABYTE MZ33-CP1?

Populate the 12 slots in the order shown in the MZ33-CP1 manual — typically filling one DIMM per channel first, then the second rank — so the registered buffer trains at CL46 without a POST halt.

When should the 1.1 V DDR5 5600 RDIMMs be replaced in a continuously running server?

Replace a module if ECC logs show recurring correctable errors on the same 128 GB stick, or if the system fails memory training at the rated CL46 timing after a firmware update.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。