暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 70mm blower fan with 75 by 30mm housing and three wires

OEM Industries

OEM Industries D07F-24SS1 70mm blower fan 24V 0.16A 3-wire

SKU CH-HWRV-5Z88E

A 70 mm blower fan with a 75×30 mm frame, 24 V 0.16 A draw and a three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeSleeve Bearing
  • LEDNo
  • Blower design directs airflow through tight 75×30 mm channels
  • NIDEC motor runs on 24 V at 0.16 A
  • 70 mm frame fits compact CPU cooler stacks
  • Sleeve bearing keeps operation simple and cost-effective
  • Three-wire lead provides power, ground and speed signal

Compact Blower Fan

The OEM Industries D07F-24SS1 is a 70 mm blower-style cooler designed for equipment that requires focused airflow in a 75 by 30 mm footprint. It operates on a 24 V supply drawing 0.16 A and connects via a three-wire lead. The unit uses a sleeve bearing and has no LED illumination.

Target Use Cases

This cooler suits technicians replacing an identical NIDEC 7530 blower in industrial or embedded systems that provide a 24 V header. It is not for builders who require a different voltage, a PWM control signal, or an LED option. It is also not for setups that need a larger frame or a different mounting pattern.

Deciding Specification

The 24 V 0.16 A electrical rating is the single figure that determines whether this blower will work in the target device; the fan will only function correctly when the host supplies exactly that voltage and current capability.

特長

  • Blower design directs airflow through tight 75×30 mm channels
  • NIDEC motor runs on 24 V at 0.16 A
  • 70 mm frame fits compact CPU cooler stacks
  • Sleeve bearing keeps operation simple and cost-effective
  • Three-wire lead provides power, ground and speed signal

仕様

ModelD07F-24SS1
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeSleeve Bearing
LEDNo

この商品に関する質問

Which version of the D07F-24SS1 blower should I pick for a 70 mm slot?

The fan is a single 70 mm blower rated at 24 V and 0.16 A with a three-wire lead; no other sizes or voltages are offered for this model.

What does the 0.16 A rating mean once the fan is installed?

At 24 V the unit draws 0.16 A, so it delivers a focused airstream suitable for spot-cooling VRMs, memory or small-form-factor chassis rather than high-volume case airflow.

What does the three-wire connection provide in practice?

The third wire carries a tachometer signal, letting the motherboard or fan controller monitor speed while the other two wires supply 24 V power and ground.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。