OEM Industries
OEM Industries FAL3F12LHSA 50x20mm CPU cooler
A 50 mm square fan with ball bearing and 3‑pin 12 V .27 A power for compact cooling
- ColorBlack
- TypeFan only
- Fan Size50mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- Compact 50 mm square frame fits tight projector housings
- Ball-bearing motor runs quietly for extended service life
- 12 V 0.27 A draw keeps power demand low
- Three-pin connector enables speed monitoring and control
- Fan-only unit weighs little for vibration-sensitive mounts
Compact 50 mm square fan
The OEM Industries FAL3F12LHSA is a 50 by 20 mm DC fan built for tight spaces such as projectors or small-form-factor systems. It runs on 12 V and draws 0.27 A through a standard three-pin connector. Ball-bearing construction supports continuous operation in confined enclosures.
12 V 0.27 A three-pin power
The single specification that decides fit is the 12 V 0.27 A three-pin interface; the cooler will only work where that exact voltage, current and header are available. Systems using two-pin, four-pin or 5 V headers cannot power this unit without an adapter. Builders needing PWM control or a different voltage must select another model.
No LED or bundled accessories
The package contains the fan only, with no LED lighting, mounting brackets, screws or software. Installers must supply their own fixation hardware and any required adapters. The bare-fan approach keeps cost low but adds assembly steps for the end user.
特長
- Compact 50 mm square frame fits tight projector housings
- Ball-bearing motor runs quietly for extended service life
- 12 V 0.27 A draw keeps power demand low
- Three-pin connector enables speed monitoring and control
- Fan-only unit weighs little for vibration-sensitive mounts
仕様
| Model | FAL3F12LHSA |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 50mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
この商品に関する質問
What does the 0.27 A rating mean for a standard 12 V fan header?
At 12 V the fan draws 0.27 A, well within the typical 1 A limit of most motherboard headers.
What does the 3-pin connector provide compared with a 4-pin header?
The 3-pin plug supplies power and tachometer signal; speed is controlled by voltage rather than PWM.
Will the 50 mm by 20 mm frame fit my projector or small-form-factor build?
The square frame measures 50 mm on each side and is 20 mm thick, so verify your mounting holes and clearance against those dimensions.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



