暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black square 60mm CPU cooler with maglev fan 12V 2.4W 3-wire

OEM Industries

OEM Industries GM1206PHVX-A 60mm Maglev CPU cooler 12V 2.4W 3-Wire

SKU CH-09C3-XBD7H

A 60 mm maglev fan rated at 12 V and 2.4 W with a three-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeMaglev
  • Power Connector3 Wires
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 60 mm square frame fits tight chassis spaces
  • 12 V 2.4 W draw keeps power use low
  • Three-wire connector enables speed monitoring
  • Black finish matches dark-themed builds

60 mm Maglev CPU Cooler Fan

The OEM Industries GM1206PHVX-A is a 60 mm square cooler with a 15 mm thick maglev fan. It runs on 12 V and draws 2.4 W through a three-wire power connector. No LED lighting is included.

Who This Suits and Who It Does Not

Builders needing a compact 60 mm cooler with maglev bearing for low noise will find it suitable. Buyers who need a larger fan diameter, higher airflow, or a four-pin PWM connector should look elsewhere.

Key Specification: 60 mm Maglev Fan

The 60 mm maglev fan with 12 V 2.4 W rating and three-wire connector is the deciding spec. Verify your motherboard header and case clearance match these exact dimensions before ordering.

特長

  • Maglev bearing reduces friction for longer life
  • 60 mm square frame fits tight chassis spaces
  • 12 V 2.4 W draw keeps power use low
  • Three-wire connector enables speed monitoring
  • Black finish matches dark-themed builds

仕様

ModelGM1206PHVX-A
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeMaglev
Power Connector3 Wires
LEDNo

この商品に関する質問

Does the 60 mm square cooler need a 60 mm mounting pattern on the CPU socket?

The cooler measures 60 mm by 60 mm and is 15 mm thick, so it requires a 60 mm square mounting footprint on the motherboard.

How do I connect the 3-wire fan to the motherboard and what step is often missed?

Plug the 3-wire connector into a 12 V CPU fan header; the third wire carries the tachometer signal, which must be connected for the BIOS to report fan speed.

When will the maglev bearing need attention or replacement?

Maglev bearings have no physical contact, so they do not wear like sleeve or ball bearings; the fan runs at 12 V and 2.4 W continuously without scheduled maintenance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。