暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR3 RDIMM modules with gold contacts in a row

OWC

OWC 128GB (8x16GB) DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM Server Memory

SKU CH-S1MA-82BB3

ECC-registered DDR3 kit delivers 128 GB across eight 16 GB modules at 1333 MHz CL9 for compatible servers and workstations

  • Capacity128GB (8 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 128GB (8 x 16GB)

Rank 2Rx4

  • ECC registered design protects data integrity in servers
  • 128 GB total capacity across eight 16 GB modules
  • DDR3 1333 speed with CL9 latency for stable throughput
  • 5 V operation meets JEDEC standard for compatibility
  • 240-pin registered RDIMM form factor fits select workstations

Server ECC Registered Memory Kit

This OWC kit provides 128GB of DDR3 server memory across eight 16GB RDIMM modules. It is built for workstations and servers that require ECC registered DIMMs. The kit will not work in standard desktop computers that only accept unbuffered memory. Mixing these registered modules with unbuffered DIMMs is not supported.

DDR3 1333 Registered DIMM Limits

The modules run at DDR3 1333 (PC3-10600) with a CAS latency of CL9 and operate at 1.5V. Each DIMM uses a 2Rx4 organisation and fits a 240-pin DDR3 slot. ECC registered memory of this type cannot be used in platforms that only support unbuffered or non-ECC DDR3. The registered buffer adds a clock cycle, so the memory controller must support registered DIMMs explicitly.

Installing Eight RDIMM Modules

All eight modules are identical, so any supported slot order works. Ensure the server or workstation manual confirms support for 16GB registered DIMMs and for the total 128GB capacity. A common issue is populating slots in a sequence the firmware does not recognise, which prevents the system from posting. Verify the qualified vendor list for the exact platform before installation.

特長

  • ECC registered design protects data integrity in servers
  • 128 GB total capacity across eight 16 GB modules
  • DDR3 1333 speed with CL9 latency for stable throughput
  • 5 V operation meets JEDEC standard for compatibility
  • 240-pin registered RDIMM form factor fits select workstations

仕様

BrandOWC
Part Number1R3D32R4128K
Capacity128GB (8 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 128GB kit or combine smaller kits to reach 128GB?

The 128GB kit supplies eight matched 16GB modules tested together, so timings and voltage stay identical across all slots — mixing separate kits can introduce subtle timing mismatches that cause instability in registered ECC systems.

What does the PC3-10600 rating deliver in a live server?

PC3-10600 means a peak transfer rate of 10600 MB/s per module at DDR3 1333; with eight modules populating all channels the server can sustain that bandwidth across the full 128GB capacity for database buffers or virtualisation workloads.

How does the 240-pin DDR3 registered ECC interface limit what I can install?

The 240-pin DDR3 registered ECC form factor fits only server and workstation boards that support registered DIMMs; it will not work in standard desktop boards, and it cannot be mixed with unbuffered DDR3 modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。