OWC 128GB (2x64GB) DDR4 2933 CL21 2Rx4 288-pin 1.2V ECC RDIMM memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR4 ECC RD…
OWC
A single 128GB DDR4 2933 ECC LRDIMM module for upgrading HP ProLiant XL270d Gen10 servers
Capacity 128GB
This OWC module delivers 128GB of DDR4 ECC load-reduced memory in a single 288-pin DIMM rated at 2933 MT/s with CL21 latency and 1.2V operation. It is built specifically for the HP ProLiant XL270d Gen10 and replaces a long list of HP part numbers. The 8Rx4 organisation and ECC capability target enterprise servers and workstations that require maximum capacity per slot and data integrity. It will not work in standard desktop computers and cannot be mixed with unbuffered or registered ECC DIMMs.
Load-reduced buffering reduces electrical loading on the memory bus, allowing the memory controller to maintain the rated 2933 MT/s speed across all populated slots even under continuous heavy workloads. ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long-running compute jobs or virtualisation tasks. Backward compatibility with 2133, 2400 and 2666 MT/s platforms lets the module clock down automatically when installed in older generations without losing stability.
The module operates at the standard DDR4 1.2V, keeping power draw low for a 128GB LRDIMM and reducing heat output inside dense server chassis. No heat spreader is fitted, so airflow from the system fans passes directly over the DRAM packages for efficient cooling. Silent solid-state operation adds no acoustic noise, and the reduced electrical load per rank helps the platform stay within its thermal envelope during extended uptime.
| Brand | OWC |
|---|---|
| Part Number | 2L9D48R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 8Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant XL270d Gen10 |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The module operates at the standard DDR4 1.2V voltage. Actual power draw depends on workload and the HP ProLiant XL270d Gen10 memory subsystem, but Load Reduced DIMMs are designed to lower electrical load on the memory bus compared to standard registered DIMMs.
The server must support DDR4 Load Reduced ECC memory and have a free 288-pin DIMM slot. This module cannot be mixed with unbuffered or standard registered ECC DIMMs, so all installed memory must be of the same Load Reduced type.
Yes, the module is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds. When mixed, all DIMMs will run at the speed of the slowest installed module and the system will operate in the supported Load Reduced ECC mode.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?