OWC 128GB (2x64GB) DDR4 2933 CL21 2Rx4 288-pin 1.2V ECC RDIMM memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR4 ECC RD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
A single 128GB DDR4 2933 ECC LRDIMM module for upgrading HP ProLiant XL270d Gen10 servers
Capacity 128GB
This OWC module delivers 128GB of DDR4 ECC load-reduced memory in a single 288-pin DIMM rated at 2933 MT/s with CL21 latency and 1.2V operation. It is built specifically for the HP ProLiant XL270d Gen10 and replaces a long list of HP part numbers. The 8Rx4 organisation and ECC capability target enterprise servers and workstations that require maximum capacity per slot and data integrity. It will not work in standard desktop computers and cannot be mixed with unbuffered or registered ECC DIMMs.
Load-reduced buffering reduces electrical loading on the memory bus, allowing the memory controller to maintain the rated 2933 MT/s speed across all populated slots even under continuous heavy workloads. ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long-running compute jobs or virtualisation tasks. Backward compatibility with 2133, 2400 and 2666 MT/s platforms lets the module clock down automatically when installed in older generations without losing stability.
The module operates at the standard DDR4 1.2V, keeping power draw low for a 128GB LRDIMM and reducing heat output inside dense server chassis. No heat spreader is fitted, so airflow from the system fans passes directly over the DRAM packages for efficient cooling. Silent solid-state operation adds no acoustic noise, and the reduced electrical load per rank helps the platform stay within its thermal envelope during extended uptime.
| Brand | OWC |
|---|---|
| Part Number | 2L9D48R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 8Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant XL270d Gen10 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The module operates at the standard DDR4 1.2V voltage. Actual power draw depends on workload and the HP ProLiant XL270d Gen10 memory subsystem, but Load Reduced DIMMs are designed to lower electrical load on the memory bus compared to standard registered DIMMs.
The server must support DDR4 Load Reduced ECC memory and have a free 288-pin DIMM slot. This module cannot be mixed with unbuffered or standard registered ECC DIMMs, so all installed memory must be of the same Load Reduced type.
Yes, the module is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds. When mixed, all DIMMs will run at the speed of the slowest installed module and the system will operate in the supported Load Reduced ECC mode.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?