暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green circuit boards with gold contacts and black chips, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR4 2666 CL19 ECC UDIMM Kit PowerEdge R240 T140 T40

SKU CH-6QXM-2P19C

16 GB DDR4 2666 ECC UDIMM kit for PowerEdge R240, T140 and T40 servers

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB kit boosts server capacity with two 8 GB modules
  • DDR4 2666 CL19 delivers responsive multitasking speed
  • ECC protection detects and corrects single-bit data errors
  • JEDEC 1.2 V standard ensures broad platform compatibility
  • Validated for PowerEdge R240 T140 T40 systems

Dell PowerEdge R240 T140 T40 Memory Kit

This 16GB kit contains two 8GB DDR4 ECC unbuffered UDIMMs built for Dell PowerEdge R240 T140 and T40 servers. It targets administrators who need error-correcting memory for stable operation in entry-level rack or tower systems. The modules run at 2666MHz with CL19 latency and 1.2V voltage. Buyers who need registered DIMMs or higher capacities must look elsewhere.

Thermals Noise and Power Draw

Each module operates at the standard DDR4 1.2V without a heat spreader, relying on system airflow for cooling. Unbuffered ECC DIMMs draw minimal power and produce no audible noise themselves. The 2666MHz speed at CL19 follows JEDEC specifications for predictable thermal behaviour in compatible PowerEdge chassis.

Build Fit and Compatibility

The 288-pin UDIMMs install directly into the server memory slots and are validated for PowerEdge R240 T140 and T40 models. Backward compatibility with 2133MHz and 2400MHz systems allows use in older configurations. No extra cables, brackets or software are required for installation.

特長

  • 16 GB kit boosts server capacity with two 8 GB modules
  • DDR4 2666 CL19 delivers responsive multitasking speed
  • ECC protection detects and corrects single-bit data errors
  • JEDEC 1.2 V standard ensures broad platform compatibility
  • Validated for PowerEdge R240 T140 T40 systems

仕様

BrandOWC
Part Number2E6D41R8016P
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemPowerEdge R240
PowerEdge T140
PowerEdge T40

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 288-pin DDR4 ECC UDIMM modules in a PowerEdge R240 and what step is often missed?

Power off the server, open the chassis, align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that all 16GB are recognised at 2666MHz.

What maintenance or replacement will the 1Rx8 ECC unbuffered kit need over its service life?

No routine maintenance is required; the modules have no heat spreader and run at 1.2V, so replacement is only necessary if a DIMM fails or a capacity increase is desired later.

What limit appears first when the CL19 2666MHz kit runs under sustained load in a PowerEdge T140?

The memory controller caps operation at the rated 2666MHz CL19 timing; sustained workloads will not exceed this frequency and the 1.2V supply remains the thermal ceiling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。