我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green circuit boards with gold contacts and black chips, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR4 2666 CL19 ECC UDIMM Kit PowerEdge R240 T140 T40

SKU CH-6QXM-2P19C

16 GB DDR4 2666 ECC UDIMM kit for PowerEdge R240, T140 and T40 servers

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB kit boosts server capacity with two 8 GB modules
  • DDR4 2666 CL19 delivers responsive multitasking speed
  • ECC protection detects and corrects single-bit data errors
  • JEDEC 1.2 V standard ensures broad platform compatibility
  • Validated for PowerEdge R240 T140 T40 systems

Dell PowerEdge R240 T140 T40 Memory Kit

This 16GB kit contains two 8GB DDR4 ECC unbuffered UDIMMs built for Dell PowerEdge R240 T140 and T40 servers. It targets administrators who need error-correcting memory for stable operation in entry-level rack or tower systems. The modules run at 2666MHz with CL19 latency and 1.2V voltage. Buyers who need registered DIMMs or higher capacities must look elsewhere.

Thermals Noise and Power Draw

Each module operates at the standard DDR4 1.2V without a heat spreader, relying on system airflow for cooling. Unbuffered ECC DIMMs draw minimal power and produce no audible noise themselves. The 2666MHz speed at CL19 follows JEDEC specifications for predictable thermal behaviour in compatible PowerEdge chassis.

Build Fit and Compatibility

The 288-pin UDIMMs install directly into the server memory slots and are validated for PowerEdge R240 T140 and T40 models. Backward compatibility with 2133MHz and 2400MHz systems allows use in older configurations. No extra cables, brackets or software are required for installation.

商品特色

  • 16 GB kit boosts server capacity with two 8 GB modules
  • DDR4 2666 CL19 delivers responsive multitasking speed
  • ECC protection detects and corrects single-bit data errors
  • JEDEC 1.2 V standard ensures broad platform compatibility
  • Validated for PowerEdge R240 T140 T40 systems

商品規格

BrandOWC
Part Number2E6D41R8016P
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemPowerEdge R240
PowerEdge T140
PowerEdge T40

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 288-pin DDR4 ECC UDIMM modules in a PowerEdge R240 and what step is often missed?

Power off the server, open the chassis, align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that all 16GB are recognised at 2666MHz.

What maintenance or replacement will the 1Rx8 ECC unbuffered kit need over its service life?

No routine maintenance is required; the modules have no heat spreader and run at 1.2V, so replacement is only necessary if a DIMM fails or a capacity increase is desired later.

What limit appears first when the CL19 2666MHz kit runs under sustained load in a PowerEdge T140?

The memory controller caps operation at the rated 2666MHz CL19 timing; sustained workloads will not exceed this frequency and the 1.2V supply remains the thermal ceiling.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。