Phanteks Revolt PH-P1200PR_BK01C 1200W power supply
- Black
- ATX 3.0 Compatible
Phanteks
Fully modular 1000 W ATX 3.0 power supply with 80 PLUS Platinum efficiency, native 12VHPWR connector for PCIe 5.0 graphics cards and no cables included
Options 1000W (Black)
The Phanteks Revolt 1000W unit is an ATX 3.0 compatible power supply delivered without any cables in the box. It targets builders who want to select their own sleeved or custom-length wires from CableMod or similar sources. The fully modular back-plate connector layout accepts only the leads a specific build requires. No stock cables means no unused clutter inside the case.
Enthusiasts planning a colour-co-ordinated loop or a minimalist showcase benefit from buying exactly the cable kit they need. System integrators who standardise on a single PSU model but vary cable sets across different chassis also save inventory space. Builders who expect a complete kit ready to plug in should choose a conventional bundled unit instead.
A single 12VHPWR output is built into the PSU housing, rated to deliver up to 600 W to a PCIe 5.0 graphics card through one cable. This connector decides whether the unit can drive modern high-end GPUs without adapters or daisy-chained 8-pin leads. If the target graphics card lacks a 12VHPWR input, a different PSU or adapter strategy is required.
| Brand | Phanteks |
|---|---|
| Series | Revolt |
| Model | PH-P1000PR_BK01C |
| Color | Black |
| Type | ATX 3.0 Compatible |
| Maximum Power | 1000 W |
| Fans | 1 x 135 mm Fluid Dynamic Bearing (FDB) Fan |
| Max PSU Length | 160 mm |
| Modular | Full Modular |
| Energy-Efficient | 80 PLUS PLATINUM Certified |
| Protection | OPP (Overpower Protection) OVP (Over Voltage Protection) UVP (Under voltage protection SCP (Short Circuit Protection) OCP (Over Current Protection) OTP (Over Temperature Protection) No-Load Protection Reset Protection |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 13-6.5A |
| Output | +12V@83A, +3.3V@25A, +5V@25A, [email protected] , +5VSB@3A |
| MTBF | Over 100,000 hours at 25 Celsius excluding the DC Fan |
| Features | Back Plate PSU Output Connector: Fully Modular 1x 18+10pin => Motherboard 5x 8pin => CPU / PCIe 5x 6pin => SATA / Molex 1x 12VHPWR => PCIe Operating Temp: 0 to 50 Celsius (The rated power will derate from 100% to 80% from 40 Celsius to 50 Celsius linearly) Operating Humidity: To 85% relative humidity (non-condensing) Storage Temperature: -40 to 85 Celsius Storage Humidity: To 95% relative humidity (non-condensing) |
| Dimensions | 6.3 in x 5.9 in x 3.4 in |
| Weight | 4.52 lbs |
| Package Content | 1x PH-P1000PR_BK01C Power Supply Unit 1x C14 (female) - C13 (male) Power cord (1500mm) Accessory: 1x User’s manual 1x Installation guide 1x PSU bag 1x Zip tie bag 1x Screw pack 1x Velcro pack 1x PSU tester |
| 配送重量 | 2.72 kg |
| 梱包サイズ | 330 × 203 × 127 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The package contains only the PSU, a C14-to-C13 mains cord, documentation, a PSU bag, zip ties, screws, Velcro strips and a PSU tester; all modular cables must be purchased separately.
The PH-P1000PR_BK01C is the 1000 W Platinum model; the 1200 W and 1600 W units are higher-wattage alternatives, and the 1600 W version carries Titanium certification instead.
The native 12VHPWR connector can deliver up to 600 W to a PCIe 5.0 GPU through a single cable, and the unit is rated to handle transient spikes up to 235 % of its 1000 W capacity.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?