Phanteks Revolt PH-P1200PR_BK01C 1200W power supply
- Black
- ATX 3.0 Compatible
Phanteks
Fully modular 1000 W ATX 3.0 power supply with 80 PLUS Platinum efficiency, native 12VHPWR connector for PCIe 5.0 graphics cards and no cables included
Options 1000W (Black)
The Phanteks Revolt 1000W unit is an ATX 3.0 compatible power supply delivered without any cables in the box. It targets builders who want to select their own sleeved or custom-length wires from CableMod or similar sources. The fully modular back-plate connector layout accepts only the leads a specific build requires. No stock cables means no unused clutter inside the case.
Enthusiasts planning a colour-co-ordinated loop or a minimalist showcase benefit from buying exactly the cable kit they need. System integrators who standardise on a single PSU model but vary cable sets across different chassis also save inventory space. Builders who expect a complete kit ready to plug in should choose a conventional bundled unit instead.
A single 12VHPWR output is built into the PSU housing, rated to deliver up to 600 W to a PCIe 5.0 graphics card through one cable. This connector decides whether the unit can drive modern high-end GPUs without adapters or daisy-chained 8-pin leads. If the target graphics card lacks a 12VHPWR input, a different PSU or adapter strategy is required.
| Brand | Phanteks |
|---|---|
| Series | Revolt |
| Model | PH-P1000PR_BK01C |
| Color | Black |
| Type | ATX 3.0 Compatible |
| Maximum Power | 1000 W |
| Fans | 1 x 135 mm Fluid Dynamic Bearing (FDB) Fan |
| Max PSU Length | 160 mm |
| Modular | Full Modular |
| Energy-Efficient | 80 PLUS PLATINUM Certified |
| Protection | OPP (Overpower Protection) OVP (Over Voltage Protection) UVP (Under voltage protection SCP (Short Circuit Protection) OCP (Over Current Protection) OTP (Over Temperature Protection) No-Load Protection Reset Protection |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 13-6.5A |
| Output | +12V@83A, +3.3V@25A, +5V@25A, [email protected] , +5VSB@3A |
| MTBF | Over 100,000 hours at 25 Celsius excluding the DC Fan |
| Features | Back Plate PSU Output Connector: Fully Modular 1x 18+10pin => Motherboard 5x 8pin => CPU / PCIe 5x 6pin => SATA / Molex 1x 12VHPWR => PCIe Operating Temp: 0 to 50 Celsius (The rated power will derate from 100% to 80% from 40 Celsius to 50 Celsius linearly) Operating Humidity: To 85% relative humidity (non-condensing) Storage Temperature: -40 to 85 Celsius Storage Humidity: To 95% relative humidity (non-condensing) |
| Dimensions | 6.3 in x 5.9 in x 3.4 in |
| Weight | 4.52 lbs |
| Package Content | 1x PH-P1000PR_BK01C Power Supply Unit 1x C14 (female) - C13 (male) Power cord (1500mm) Accessory: 1x User’s manual 1x Installation guide 1x PSU bag 1x Zip tie bag 1x Screw pack 1x Velcro pack 1x PSU tester |
| 出貨重量 | 2.72 kg |
| 包裝尺寸 | 330 × 203 × 127 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The package contains only the PSU, a C14-to-C13 mains cord, documentation, a PSU bag, zip ties, screws, Velcro strips and a PSU tester; all modular cables must be purchased separately.
The PH-P1000PR_BK01C is the 1000 W Platinum model; the 1200 W and 1600 W units are higher-wattage alternatives, and the 1600 W version carries Titanium certification instead.
The native 12VHPWR connector can deliver up to 600 W to a PCIe 5.0 GPU through a single cable, and the unit is rated to handle transient spikes up to 235 % of its 1000 W capacity.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?