暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rubber 120 mm fan shroud 7 mm thick with mounting holes

Phobya

Phobya 38177 Shroud & Decoupling 120mm 7mm Rubber

SKU CH-K6ST-N09GW

A 120 mm rubber shroud that decouples the fan from the radiator to cut vibration noise and spread airflow more evenly for better cooling

  • ColorBlack
  • FeaturesA combined product which reduces noise emission and improves

Size 120mm

  • Reduces fan vibration noise with 7 mm rubber decoupling
  • Improves radiator cooling through even airflow distribution
  • Eliminates dead spots between fan motor and fins
  • Stackable design allows multiple shrouds for added performance
  • Fits 120 mm fan and radiator setups

Phobya 38177 Shroud and Decoupler

This rubber shroud fits 120mm fan and radiator pairs in both watercooling and air-cooling builds. It sits between the fan and radiator to improve airflow distribution across the fin surface. The 7mm hard rubber construction also isolates vibration from fast-spinning fans. It suits builders who want quieter operation and better thermal efficiency from existing hardware.

Airflow optimisation and vibration isolation

Mounting the shroud removes the deadspot caused by the fan motor hub, letting air pass more evenly through the radiator fins. Multiple shrouds can be stacked with longer screws to extend the airflow path further. The rubber material seals the joint so air is forced through the fins rather than leaking around the edges. This helps systems that run high static-pressure fans at speed.

Limits of the 7mm rubber design

The part only works with 120mm mounting holes and adds 7mm of thickness per layer to the stack. It cannot compensate for undersized radiators or fans that lack sufficient static pressure. Builders needing larger fan sizes or different mounting patterns will not be able to use this shroud. It also does not replace case damping or fan-speed control for overall acoustic management.

特長

  • Reduces fan vibration noise with 7 mm rubber decoupling
  • Improves radiator cooling through even airflow distribution
  • Eliminates dead spots between fan motor and fins
  • Stackable design allows multiple shrouds for added performance
  • Fits 120 mm fan and radiator setups

仕様

BrandPhobya
Model38177
Part Number38177
ColorBlack
FeaturesA combined product which reduces noise emission and improves the cooling performance in one!

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the Phobya 38177 shroud fit my existing 120mm radiator and fan?

Yes, the 120mm shroud is designed to sit between any standard 120mm fan and radiator, improving airflow distribution and sealing the gap.

How can I confirm the shroud is reducing vibration once installed?

Run the fan at high speed; the 7mm hard rubber layer should stop case resonance and the radiator should feel steady with no audible buzz.

Does the 38177 package include mounting screws or do I need longer ones?

Only the rubber shroud is supplied; you must provide longer screws that pass through fan, shroud and radiator.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。