暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

RUCKUS WIRELESS

RUCKUS WIRELESS P01-Q710-US02 2x1000Base-T RJ-45 wireless router

SKU CH-D3MQ-6ARNC MPN P01-Q710-US02

Wireless router with 2x2 MIMO, IPv4 and IPv6 support, four antennas and two 1000Base-T RJ-45 ports

  • Dual 1000Base-T RJ-45 ports for wired throughput
  • PoE+ support simplifies installation with single-cable power
  • 2×2 MIMO technology improves wireless capacity
  • Four antennas extend coverage across the space
  • 20 W operational draw keeps energy costs low

What this router does and who it fits

The Ruckus P01-Q710-US02 is a wireless router with two 1000Base-T RJ-45 ports and four antennas. It provides a data transfer rate of 200 MBps using 2x2 MIMO technology. The unit supports IPv4, IPv6 and VLAN features for network segmentation. Power Over Ethernet Plus allows the router to be powered through the network cable at 12 V with an operational draw of 20 watts. A mounting bracket is included for installation.

Ideal deployments and mismatched needs

This router suits small offices or branch locations that need a compact, PoE+-powered access point with wired uplinks. It works well where a single Ethernet drop provides both connectivity and power. Buyers who require more than two wired ports or higher throughput than 200 MBps should look at other models. Environments needing outdoor-rated enclosures or advanced mesh protocols will need different hardware.

The spec that decides fit

The two 1000Base-T RJ-45 interfaces define the wired connectivity ceiling; only two Ethernet devices can connect directly. If your deployment needs three or more wired uplinks or downlink ports, this unit cannot meet that requirement without an additional switch.

特長

  • Dual 1000Base-T RJ-45 ports for wired throughput
  • PoE+ support simplifies installation with single-cable power
  • 2×2 MIMO technology improves wireless capacity
  • Four antennas extend coverage across the space
  • 20 W operational draw keeps energy costs low

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What power source must I already have to run the router?

The router operates on 12 V nominal voltage delivered through a PoE+ connection, so you need a PoE+ injector or switch that can supply at least 20 watts.

Can I connect my existing gigabit wired devices to the two 1000Base-T RJ-45 ports?

Yes, both Ethernet ports support 1000Base-T, allowing your current gigabit devices to link directly at full speed.

How do I verify the router is delivering the rated 200 MBps data transfer rate after setup?

Run a local throughput test between a wired client and a wireless client connected to the 2x2 MIMO radios; sustained results near 200 MBps confirm the link is performing as specified.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。