我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
White rectangular wireless router with four antennas and two RJ-45 ports

RUCKUS WIRELESS

RUCKUS WIRELESS P01-Q710-US02 2x1000Base-T RJ-45 wireless router

SKU CH-D3MQ-6ARNC MPN P01-Q710-US02

Wireless router with 2x2 MIMO, IPv4 and IPv6 support, four antennas and two 1000Base-T RJ-45 ports

  • Dual 1000Base-T RJ-45 ports for wired throughput
  • PoE+ support simplifies installation with single-cable power
  • 2×2 MIMO technology improves wireless capacity
  • Four antennas extend coverage across the space
  • 20 W operational draw keeps energy costs low

What this router does and who it fits

The Ruckus P01-Q710-US02 is a wireless router with two 1000Base-T RJ-45 ports and four antennas. It provides a data transfer rate of 200 MBps using 2x2 MIMO technology. The unit supports IPv4, IPv6 and VLAN features for network segmentation. Power Over Ethernet Plus allows the router to be powered through the network cable at 12 V with an operational draw of 20 watts. A mounting bracket is included for installation.

Ideal deployments and mismatched needs

This router suits small offices or branch locations that need a compact, PoE+-powered access point with wired uplinks. It works well where a single Ethernet drop provides both connectivity and power. Buyers who require more than two wired ports or higher throughput than 200 MBps should look at other models. Environments needing outdoor-rated enclosures or advanced mesh protocols will need different hardware.

The spec that decides fit

The two 1000Base-T RJ-45 interfaces define the wired connectivity ceiling; only two Ethernet devices can connect directly. If your deployment needs three or more wired uplinks or downlink ports, this unit cannot meet that requirement without an additional switch.

商品特色

  • Dual 1000Base-T RJ-45 ports for wired throughput
  • PoE+ support simplifies installation with single-cable power
  • 2×2 MIMO technology improves wireless capacity
  • Four antennas extend coverage across the space
  • 20 W operational draw keeps energy costs low

商品規格

本商品目前尚未公佈規格。

商品問答

What power source must I already have to run the router?

The router operates on 12 V nominal voltage delivered through a PoE+ connection, so you need a PoE+ injector or switch that can supply at least 20 watts.

Can I connect my existing gigabit wired devices to the two 1000Base-T RJ-45 ports?

Yes, both Ethernet ports support 1000Base-T, allowing your current gigabit devices to link directly at full speed.

How do I verify the router is delivering the rated 200 MBps data transfer rate after setup?

Run a local throughput test between a wired client and a wireless client connected to the 2x2 MIMO radios; sustained results near 200 MBps confirm the link is performing as specified.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。