暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black USB-A to 2.5" SATA adapter cable, 5.41in matte finish

Sabrent EC-SSHD USB 3.0 to 2.5" SATA Adapter Cable 5.41in

SKU CH-TSRR-DX20J

Connects a 2.5" SATA SSD or HDD to a USB 3.0 Type-A port at 5Gbps with UASP support, bus-powered with no external adapter needed

  • ColorBlack
  • Cable Length5.41 inches
  • Changer Typetype
  • SpecificationsEC-SSHD, USB Type A, 1, 15 L x 13 W x 3 H centimeters, 1 oun
  • Thunderbolt 3USB Type A
  • Connector AUSB Type A
  • Connect 2.5" SATA SSDs and laptop HDDs via USB-A
  • USB 3.0 5Gbps with UASP for faster transfers
  • Bus-powered design needs no external adapter for most drives
  • Plug-and-play hot-swap on Windows, macOS and Linux
  • LED shows power and activity status

Sabrent EC-SSHD USB 3.0 to 2.5" SATA Adapter

This adapter cable connects a standard 2.5 inch SATA SSD or laptop hard drive to a USB Type-A port on a computer. It is designed for users who need quick, temporary access to drive data for recovery, cloning or file transfer without installing the drive internally. The short 5.41 inch cable keeps the setup compact on a desk.

USB 3.0 5Gbps with UASP for sustained transfers

The USB 3.0 interface delivers up to 5Gbps bandwidth and supports UASP on compatible systems to maintain higher throughput during long copy operations. Power is drawn directly from the host USB port, so most 2.5 inch drives run without an external supply. Some older or high-capacity mechanical drives may need a powered hub if they fail to spin up.

Verify your drive and host port before ordering

This adapter only fits 2.5 inch drives with a standard SATA connector; it does not support M.2 NVMe, M.2 SATA, 3.5 inch desktop drives or slim optical drives. The host requires a USB Type-A port; computers with only USB-C need a separate USB-C to USB-A adapter. It is not intended for use as a permanent system boot drive in all configurations.

特長

  • Connect 2.5" SATA SSDs and laptop HDDs via USB-A
  • USB 3.0 5Gbps with UASP for faster transfers
  • Bus-powered design needs no external adapter for most drives
  • Plug-and-play hot-swap on Windows, macOS and Linux
  • LED shows power and activity status

仕様

BrandSABRENT
SeriesEC-SSHD
ModelEC-SSHD
Part NumberEC-SSHD
ColorBlack
Cable Length5.41 inches
Changer Typetype
SpecificationsEC-SSHD, USB Type A, 1, 15 L x 13 W x 3 H centimeters, 1 ounces, Matte, SABRENT, Computers with USB port and sufficient power supply
Thunderbolt 3USB Type A
Connector AUSB Type A
Connector BUSB Type A
Terminal Gender2.5" SSD/SATA Adapter, Male-to-Female
Connector PlatingMatte
Cable Jakcet TypeMatte
Connector StyleUSB Type A, 2.5" SSD/SATA Adapter
FeaturesUSB Type A, Matte, Computers with USB port and sufficient power supply, 1, SABRENT, EC-SSHD
Dimensions15 cm x 13 cm x 3 cm
Weight1 ounces
Package Quantity1

この商品に関する質問

Does the Sabrent EC-SSHD adapter get hot or draw much power when a 2.5" SATA SSD runs all day?

The adapter is USB bus-powered and draws only what the drive needs; it has no fan or heatsink, so it stays cool under normal 5 Gbps USB 3.0 loads.

What must I already own to use this EC-SSHD cable with a 2.5" SATA drive?

You need a computer with a USB Type-A port that can supply enough current for the drive; some older or high-capacity mechanical HDDs may require a powered USB hub.

Will this USB 3.0 Type-A adapter work if I keep an older laptop that only has USB 2.0 ports?

Yes, the adapter is backward-compatible with USB 2.0, though transfer speeds will be limited to the older port's maximum.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。