저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black USB-A to 2.5" SATA adapter cable, 5.41in matte finish

Sabrent EC-SSHD USB 3.0 to 2.5" SATA Adapter Cable 5.41in

SKU CH-TSRR-DX20J

Connects a 2.5" SATA SSD or HDD to a USB 3.0 Type-A port at 5Gbps with UASP support, bus-powered with no external adapter needed

  • ColorBlack
  • Cable Length5.41 inches
  • Changer Typetype
  • SpecificationsEC-SSHD, USB Type A, 1, 15 L x 13 W x 3 H centimeters, 1 oun
  • Thunderbolt 3USB Type A
  • Connector AUSB Type A
  • Connect 2.5" SATA SSDs and laptop HDDs via USB-A
  • USB 3.0 5Gbps with UASP for faster transfers
  • Bus-powered design needs no external adapter for most drives
  • Plug-and-play hot-swap on Windows, macOS and Linux
  • LED shows power and activity status

Sabrent EC-SSHD USB 3.0 to 2.5" SATA Adapter

This adapter cable connects a standard 2.5 inch SATA SSD or laptop hard drive to a USB Type-A port on a computer. It is designed for users who need quick, temporary access to drive data for recovery, cloning or file transfer without installing the drive internally. The short 5.41 inch cable keeps the setup compact on a desk.

USB 3.0 5Gbps with UASP for sustained transfers

The USB 3.0 interface delivers up to 5Gbps bandwidth and supports UASP on compatible systems to maintain higher throughput during long copy operations. Power is drawn directly from the host USB port, so most 2.5 inch drives run without an external supply. Some older or high-capacity mechanical drives may need a powered hub if they fail to spin up.

Verify your drive and host port before ordering

This adapter only fits 2.5 inch drives with a standard SATA connector; it does not support M.2 NVMe, M.2 SATA, 3.5 inch desktop drives or slim optical drives. The host requires a USB Type-A port; computers with only USB-C need a separate USB-C to USB-A adapter. It is not intended for use as a permanent system boot drive in all configurations.

주요 특징

  • Connect 2.5" SATA SSDs and laptop HDDs via USB-A
  • USB 3.0 5Gbps with UASP for faster transfers
  • Bus-powered design needs no external adapter for most drives
  • Plug-and-play hot-swap on Windows, macOS and Linux
  • LED shows power and activity status

사양

BrandSABRENT
SeriesEC-SSHD
ModelEC-SSHD
Part NumberEC-SSHD
ColorBlack
Cable Length5.41 inches
Changer Typetype
SpecificationsEC-SSHD, USB Type A, 1, 15 L x 13 W x 3 H centimeters, 1 ounces, Matte, SABRENT, Computers with USB port and sufficient power supply
Thunderbolt 3USB Type A
Connector AUSB Type A
Connector BUSB Type A
Terminal Gender2.5" SSD/SATA Adapter, Male-to-Female
Connector PlatingMatte
Cable Jakcet TypeMatte
Connector StyleUSB Type A, 2.5" SSD/SATA Adapter
FeaturesUSB Type A, Matte, Computers with USB port and sufficient power supply, 1, SABRENT, EC-SSHD
Dimensions15 cm x 13 cm x 3 cm
Weight1 ounces
Package Quantity1

이 상품에 대한 질문

Does the Sabrent EC-SSHD adapter get hot or draw much power when a 2.5" SATA SSD runs all day?

The adapter is USB bus-powered and draws only what the drive needs; it has no fan or heatsink, so it stays cool under normal 5 Gbps USB 3.0 loads.

What must I already own to use this EC-SSHD cable with a 2.5" SATA drive?

You need a computer with a USB Type-A port that can supply enough current for the drive; some older or high-capacity mechanical HDDs may require a powered USB hub.

Will this USB 3.0 Type-A adapter work if I keep an older laptop that only has USB 2.0 ports?

Yes, the adapter is backward-compatible with USB 2.0, though transfer speeds will be limited to the older port's maximum.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.