暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Seagate

Seagate ST2000NM0023 2TB 7200RPM SAS 128MB 3.5" internal hard drive

SKU CH-1P14-QDNTW

2 TB enterprise SAS hard drive spinning at 7 200 RPM with 128 MB cache

  • 2 TB capacity for large-scale data storage
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 6 Gb/s interface suits enterprise controllers
  • 128 MB cache buffers heavy random I/O
  • Zero hours recorded confirms factory-new condition

2 TB SAS Enterprise Drive

The Seagate Constellation ES.3 ST2000NM0023 is a 3.5-inch internal hard drive with a 2000 GB capacity and a 7200 RPM spindle speed. It connects via a SAS 6Gb/s interface and includes a 128 MB cache buffer. The unit is supplied new with zero powered-on hours.

Built for Servers and Arrays

This drive suits storage servers, RAID arrays and backup appliances that accept 3.5-inch SAS devices. It is not for systems that lack a SAS host bus adapter or backplane. Desktop motherboards and consumer enclosures without SAS support cannot use this drive.

SAS 6Gb/s Interface Decides Fit

The single specification that determines compatibility is the SAS 6Gb/s interface. The drive requires a controller or backplane that speaks the SAS protocol at 6 Gbit/s. Without that connection, the drive will not function.

特長

  • 2 TB capacity for large-scale data storage
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 6 Gb/s interface suits enterprise controllers
  • 128 MB cache buffers heavy random I/O
  • Zero hours recorded confirms factory-new condition

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does my system need a SAS 6Gb/s controller to use this ST2000NM0023 drive?

Yes, the drive uses a 3.5" SAS 6Gb/s interface and requires a compatible SAS controller or HBA to operate.

Can I mix this 7200RPM SAS drive with older SAS drives running at 3Gb/s on the same controller?

The drive supports 6Gb/s SAS; when connected to a 3Gb/s backplane or controller it will negotiate down to the slower link speed.

How can I confirm the drive is healthy after installation given it shows zero hours?

Run a SMART self-test and verify the power-on hours counter reads zero, matching the zero-hours condition stated for this unit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。