我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 3.5 inch SAS hard drive with circuit board visible

Seagate

Seagate ST2000NM0023 2TB 7200RPM SAS 128MB 3.5" internal hard drive

SKU CH-1P14-QDNTW

2 TB enterprise SAS hard drive spinning at 7 200 RPM with 128 MB cache

  • 2 TB capacity for large-scale data storage
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 6 Gb/s interface suits enterprise controllers
  • 128 MB cache buffers heavy random I/O
  • Zero hours recorded confirms factory-new condition

2 TB SAS Enterprise Drive

The Seagate Constellation ES.3 ST2000NM0023 is a 3.5-inch internal hard drive with a 2000 GB capacity and a 7200 RPM spindle speed. It connects via a SAS 6Gb/s interface and includes a 128 MB cache buffer. The unit is supplied new with zero powered-on hours.

Built for Servers and Arrays

This drive suits storage servers, RAID arrays and backup appliances that accept 3.5-inch SAS devices. It is not for systems that lack a SAS host bus adapter or backplane. Desktop motherboards and consumer enclosures without SAS support cannot use this drive.

SAS 6Gb/s Interface Decides Fit

The single specification that determines compatibility is the SAS 6Gb/s interface. The drive requires a controller or backplane that speaks the SAS protocol at 6 Gbit/s. Without that connection, the drive will not function.

商品特色

  • 2 TB capacity for large-scale data storage
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 6 Gb/s interface suits enterprise controllers
  • 128 MB cache buffers heavy random I/O
  • Zero hours recorded confirms factory-new condition

商品規格

本商品目前尚未公佈規格。

商品問答

Does my system need a SAS 6Gb/s controller to use this ST2000NM0023 drive?

Yes, the drive uses a 3.5" SAS 6Gb/s interface and requires a compatible SAS controller or HBA to operate.

Can I mix this 7200RPM SAS drive with older SAS drives running at 3Gb/s on the same controller?

The drive supports 6Gb/s SAS; when connected to a 3Gb/s backplane or controller it will negotiate down to the slower link speed.

How can I confirm the drive is healthy after installation given it shows zero hours?

Run a SMART self-test and verify the power-on hours counter reads zero, matching the zero-hours condition stated for this unit.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。